NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

jj wrote:

Hi @wade7575, @all

I think I will not get much of a difference by changing FW versions. I got the latest version installed already, and as I mentioned, I got real work copy speed of 375 MB/s over a 12 GB file.
And I also have a USB 3.2 Gen 1 port.
See also Crystal Mark below. 

Thank you very much for your time
 

I posted the message for dreaminglife but if it helped you as well that's great.

 

Good 

Anyone has problem with Unionsine MD202 USB-C - USB-C cable came in the package? It seems that it matters how I plug into the PC USB-C slot in one direction it works and the PC recognize it and it doesn't work if I rotate the plug by 180° 
Could it caused by firmware or simply the cable (or PC) is bad?

Hi,
It may be the cable or the USB port which is defective but nothing to do with the firmware 

blackbile wrote:

Anyone has problem with Unionsine MD202 USB-C - USB-C cable came in the package? It seems that it matters how I plug into the PC USB-C slot in one direction it works and the PC recognize it and it doesn't work if I rotate the plug by 180° 
Could it caused by firmware or simply the cable (or PC) is bad?

I haven't any problems with the included cables myself but I did switch to longer cables because I needed longer cables and I found that these cables work with every enclosure I have no matter what the brand where I have had problems with other cables in the past and this was a bonus switching to these cables.

These cables will also last longer because of the braid on them and will also help the wires not to break inside.

vi.aliexpress.com/item/1005004852057867....gatewayAdapt=glo2vnm