--- SURVEY Are you satisfied with the S-D site? ---
Hello to all of you and thank you again for your loyalty,
Today I want to know if you are satisfied with the site since the change of the server and some touch-ups of the color and the change of the theme of the Forum.
Of course I am aware that there may still be work to do but the biggest part is done
Thank you for your answers
www.station-drivers.com/index.php/en/for...th-the-s-d-site#3618
NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
- Shonk
- 离线
- Super Utilisateur
-
Enregistré
- 帖子: 132
- Thanks: 53
- Shonk
- 离线
- Super Utilisateur
-
Enregistré
- 帖子: 132
- Thanks: 53
Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
1 个月 3 周 �
Ofc you can i customize all of mine for the drive actually in there and its actual serial number and such
Here's one as an example
Here's one as an example
Code:
;Configure Start
;=================FW Configure=================
U2PHY = 02 f4 9b e0 e1
U3PHY = 02 d4 09 00 d5 00 80
VID = 0xbda
PID = 0x9210
MANUFACTURE = "Samsung"
SCSI_VENDOR = "Samsung"
PRODUCT = "Samsung SSD PM9A1 1TB"
SCSI_PRODUCT = "SSD PM9A1 1TB"
SERIAL = "S641NX0TB24240"
DISK_HOTPLUG = 0x0
PINMUX1 = 0x70000
PINMUX2 = 0x0
U2_MAXPWR = 0xfa
U3_MAXPWR = 0x70
ASPMDIS = 0x0
;SUSPEND_DISK_OFF = 1
;10 minutes of idle time will disable disk power
DISK_IPS_THRES = 10
;EN_UPS = 0x0
;PD = 0x0
LED = 0x1
;HW_LED_CFG = 0x0
;CUSTOMIZED_LED is 15 bytes
;CUSTOMIZED_LED = 01 01
;SUSPEND_LED_OFF = 0x0
;FAN = 0x0
;DIS_SHOW_EMPTY_DISK = 0x1
;FORCE_SATA_NORMAL_DMA = 0x0
UART_DBG_PIN = 5
;FINGER_PRINT_EN = n
;=================Tool Configure=================
;DISCONN_FORCE_USB2 = n
FORMAT_DISK = n
;INC_SERIAL = y
;PARTITION: GPT, MBR
PARTITION = "MBR"
;FORMAT: NTFS, exFAT
FORMAT = "NTFS"
;LABEL max allowed - characters
LABEL = "My USB"
以下用户感谢了你: pt83
- pt83
- 离线
- Poster
-
Enregistré
- 帖子: 7
- Thanks: 0
Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
1 个月 3 周 �I want to add GUID is that possible? Orico Box a few years ago do have GUID but newer one doesn't have. Which is needed for my UnraidOS to accept the license linking.Ofc you can i customize all of mine for the drive actually in there and its actual serial number and such
- yasins
- 离线
- Newbie
-
Enregistré
- 帖子: 2
- Thanks: 0
- yasins
- 离线
- Newbie
-
Enregistré
- 帖子: 2
- Thanks: 0
Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
1 个月 1 周 � - 1 个月 1 周 �
Good day, Is it possible to change the IC Pkg Type section of the box and get SATA feature in the box? Is such a thing possible? There is also Realtek rtl9210b-CG SATA support, which is normally found on the box., so I set the firmware to 1.33.44. Model : M2PV-C3
Code:
**************************************************************
Device : [Port4] : Realtek RTL9210B-CG #0
**************************************************************
U2PHY : n/a
U3PHY : n/a
VID : 0x0bda
PID : 0x9210
MANUFACTURE : "Realtek"
PRODUCT : "Realtek"
SERIAL : "012345678909"
SCSI_PRODUCT : "RTL9210B-CG "
SCSI_VENDOR : "Realtek "
USB_SELF_PWR : n/a
DISK_HOTPLUG : 0x00
LED : n/a
PINMUX1 : 0x00000000
PINMUX2 : 0x00000000
U2_MAXPWR : 0xfa
U3_MAXPWR : 0x70
ASPMDIS : 0x00
PCIE_REFCLK : n/a
DISK_IPS_THRES : 0x00
SWR_1_2V : n/a
EN_UPS : n/a
PD : n/a
CUSTOMIZED_LED : 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00
SUSPEND_LED_OFF : 0x01
FORCE_USB_SPEED : n/a
FORCE_PCIE_SPEED : n/a
EN_U1U2 : n/a
FORCE_USB_QUIRK : n/a
FORCE_PCIE_QUIRK : n/a
FAN : 0x00000000
DIS_SHOW_EMPTY_DISK : n/a
FORCE_SATA_NORMAL_DMA : n/a
UART_DBG_PIN : 0x05
FINGER_PRINT_EN : n/a
RM_INTERNAL_RD : n/a
HS_AUTO_SWITCH : 0x05
UART_BAUD_RATE : n/a
CUSTOMIZED_DISK_IDENTIFY : n/a
HW_LED_CFG : n/a
CDROM_CFG : n/a
SUPPORT_HID : n/a
LATE_INIT_DISK : n/a
SCSI_WP_PIN : n/a
SD_MMC_TYPE : n/a
FORCE_PORT_TYPE : n/a
BCDDEVICE : n/a
SUSPEND_DISK_OFF : 0x01
SCSI_WB_PIN : n/a
CUSTOMIZED_FEATURE : n/a
PERIPH_API : n/a
RAID_CFG : n/a
Boot Mode : Flash
FW Ver : 1.33.44
FW Build Date : 2024.01.18
IC Pkg Type : PCIE
UUID : n/a
Disconn_ForceUSB2 : false
Last edit: 1 个月 1 周 � by yasins.
创建页面时间:0.087秒