Forum New Messages

--- SURVEY Are you satisfied with the S-D site? ---

Hello to all of you and thank you again for your loyalty,
Today I want to know if you are satisfied with the site since the change of the server and some touch-ups of the color and the change of the theme of the Forum.
Of course I am aware that there may still be work to do but the biggest part is done
Thank you for your answers
www.station-drivers.com/index.php/en/for...th-the-s-d-site#3618

ssd NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

  • admin
  • admin的头åƒ� Topic Author
  • 离线
  • Admin
  • Admin
    Administrateur
  • 帖子: 699
  • Thanks: 361

NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

1 年 10 个月 � - 1 年 10 个月 �
#354

 Restoration Topics Old Forum
created by  sdefrwggerg
it´s for both RTL9210 and RTL9210B Chipsets dumped the current fw info with MPTool, made sure to change all parameters in *.cfg file RTL9210B_CG_Lite.cfg to match the original fw dumped info and finally commented the DISK_IPS_THRES entry.

Fideco,Orico..
1. Remove nvme from enclosure.
2. Fw update to latest firmware your rtl9210 enclosure see above for latest fw and cfg file.
3. Update to latest firmware your nvme m.2 using a pcie pc slot see nvme manufacturer app.
4. Reinsert nvme to enclosure and be happy.

Version 1.29.8 for A and B
IC Ver : 0xa0010001 is A
IC Ver : 0xa0010002 is B
Download

If you brick RTL9210 Driver her is a method to unbrick Drive with Reset SERIAL FLASH MEMORY Chip with 8 Pin same Procedure for JMS583.
Find a Chip on the board that is small and has 2x3 mm aspect ratio and on the top is printed P25Q40SH or FM25Q04A or PUYA P25D40H. Search for the Datasheet of it look for CS# and VCC Pin or CS# and Hardware Reset Pin in Datasheet description of Pin Configurations. There is a Hard Reset Procedure on Rom in case of bricking your device. You need to short pins 1 & 8 with tweezers then connect to USB port for 10 seconds (until you hear a ding) and then remove the tweezers (unshort) while it still plugged in and flash a working Rom via USB from here. This will force RTL9210 to start with internal ROM, not with external f/w in SPI flash.

Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060,  Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
Last edit: 1 年 10 个月 � by admin.
以下用户感谢了你: pipes80@live.it, djmaniac44

登录注册一个帐号 以加入对话

  • admin
  • admin的头åƒ� Topic Author
  • 离线
  • Admin
  • Admin
    Administrateur
  • 帖子: 699
  • Thanks: 361

Re: NVME USB drives Realtek RTL9210B / RTL9210A Firmware only for B v1.29.12

1 年 10 个月 �
#355
 by  sdefrwggerg
Replied by  sdefrwggerg  on topic  NVME USB drives Realtek RTL9210B / RTL9210 Firmware v1.23.9

re-uploaded  here

Settings for ORICO M2PJM-C3 Update from FW Ver : 1.18.12 FW Build Date : 2019.11.19 to:

VID : 0x0bda
PID : 0x9210
MANUFACTURE : "External"
PRODUCT : "M.2 NVME"
SERIAL : "012345678903"
SCSI_PRODUCT : "M.2 NVME"
SCSI_VENDOR : "External"
DISK_HOTPLUG : 0x00
LED : 0x01
PINMUX1 : 0x00070000
PINMUX2 : 0x00000000
U2_MAXPWR : 0xfa
U3_MAXPWR : 0x70
ASPMDIS : 0x00
PCIE_REFCLK : n/a
DISK_IPS_THRES : 0x01
SWR_1_2V : n/a
EN_UPS : n/a
PD : n/a
CUSTOMIZED_LED : n/a
SUSPEND_LED_OFF : n/a
FORCE_USB_SPEED : n/a
FORCE_PCIE_SPEED : n/a
FORCE_USB_QUIRK : n/a
FORCE_PCIE_QUIRK : n/a
FAN : 0x00000000
DIS_SHOW_EMPTY_DISK : 0x00
FORCE_SATA_NORMAL_DMA : n/a
UART_DBG_PIN : 0x00
FINGER_PRINT_EN : n/a
RM_INTERNAL_RD : 0x00
HS_AUTO_SWITCH : n/a
EFUSE :
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
10 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
20 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
30 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
40 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
50 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
60 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
70 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
80 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
90 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
b0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

Boot Mode : Flash NM
FW Ver : 1.23.9
FW Build Date : 2020.10.05
IC Ver : 0xa0010001
IC Pkg Type : PCIE

Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060,  Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.

登录注册一个帐号 以加入对话

  • admin
  • admin的头åƒ� Topic Author
  • 离线
  • Admin
  • Admin
    Administrateur
  • 帖子: 699
  • Thanks: 361

Re: NVME USB drives Realtek RTL9210B / RTL9210A Firmware only for B v1.29.12

1 年 10 个月 �
#356
par  Galixte
Réponse de  Galixte  sur le sujet  NVME USB drives Realtek RTL9210B / RTL9210 Firmware v1.23.9
On this page :   plugable.com/products/usbc-nvme   I found a firmware revision for  RTL9210  which is doesn’t available here on Station-Drivers: 1.27.5 (december 2021).

Download:   media.plugable.com/downloads/drivers/pro...ekfirmware202112.zip  

Release notes:
Released December 2021This firmware update aims to improve stability with Samsung 980 Pro and Western Digital SN550 NVMe SSDs.The power LED behavior is also improved on Windows, and Intel based Mac systems: now when safely ejected the power LED should turn off ( it may blink slowly ) indicating the drive may be safely unplugged from the computer.This update is recommended for uses who have experienced connectivity problems with Samsung 980 Pro or Western Digital SN550 NVMe SSDs.
I’ve tried to add it manually but it doesn’t work. Is there any problem to submit new file on Station-Drivers?

@admin Could you add this, please?

Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060,  Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.

登录注册一个帐号 以加入对话

  • admin
  • admin的头åƒ� Topic Author
  • 离线
  • Admin
  • Admin
    Administrateur
  • 帖子: 699
  • Thanks: 361

Re: NVME USB drives Realtek RTL9210B / RTL9210A Firmware only for B v1.29.12

1 年 10 个月 �
#357
Seehank
Galixte post=6142 userid=5274On this page:   plugable.com/products/usbc-nvme   I found a firmware revision for  RTL9210  which is doesn't available here on Station-Drivers:  1.27.5 (december 2021).

Download:   media.plugable.com/downloads/drivers/pro...ekfirmware202112.zip
Unfortunately it does not seem to have files for RTL9210B in it.

Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060,  Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.

登录注册一个帐号 以加入对话

  • admin
  • admin的头åƒ� Topic Author
  • 离线
  • Admin
  • Admin
    Administrateur
  • 帖子: 699
  • Thanks: 361

Re: NVME USB drives Realtek RTL9210B / RTL9210A Firmware only for B v1.29.12

1 年 10 个月 �
#358

Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060,  Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.

登录注册一个帐号 以加入对话

创建页面时间:0.086秒
核心: Kunena 论坛