Hello everyone

I wanted to thank those who regularly donate to me so I don't forget them, and if SD continues, it's thanks to them too.
A BIG thank you to all of you.😉 Fdrsoft

ssd NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

  • pt83
  • Portrait de pt83
  • Hors Ligne
  • Poster 2
  • Poster 2
    Enregistré
  • Messages : 7
  • Thanks: 0

Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

il y a 6 mois 1 semaine - il y a 6 mois 1 semaine
#3746
Yes I just tried to flash one of them which send to safemode, I can just reformat to make them normal again.
The info I showed is before flashing.
Dernière édition: il y a 6 mois 1 semaine par pt83.

Connexion ou Créer un compte pour participer à la conversation.

  • Shonk
  • Portrait de Shonk
  • Hors Ligne
  • Big Poster
  • Big Poster
    Enregistré
  • Messages : 79
  • Thanks: 31

Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

il y a 6 mois 1 semaine - il y a 6 mois 1 semaine
#3747
I have 8 Orico RTL9201B's Orico are very lazy and hardly ever use different firmware or nvram

here's the factory config from one of mine
it should be fine on yours also

mega.nz/file/JnZgyIwK#cxP9AVtktztyI6yNun...2rTZZdX1WkiCnmiCrjzo
Dernière édition: il y a 6 mois 1 semaine par Shonk.
Les utilisateur(s) suivant ont remercié: pt83

Connexion ou Créer un compte pour participer à la conversation.

  • pt83
  • Portrait de pt83
  • Hors Ligne
  • Poster 2
  • Poster 2
    Enregistré
  • Messages : 7
  • Thanks: 0

Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

il y a 6 mois 1 semaine
#3748
Its no good reading it now you have to read it before ever flashing it

the second one is running the goldenfirmware (safemode firmware)
as you havnt added complete info is my guess
 
This is the original info
Code:
************************************************************** Device : [Port6] : Realtek RTL9210 NVME #0 ************************************************************** U2PHY : n/a U3PHY : n/a VID : 0x0bda PID : 0x9210 MANUFACTURE : "Realtek" PRODUCT : "RTL9210" SERIAL : "012345678905" SCSI_PRODUCT : "RTL9210 NVME    " SCSI_VENDOR : "Realtek " DISK_HOTPLUG : n/a LED : 0x01 PINMUX1 : n/a PINMUX2 : n/a U2_MAXPWR : n/a U3_MAXPWR : n/a ASPMDIS : n/a PCIE_REFCLK : n/a DISK_IPS_THRES : n/a SWR_1_2V : n/a EN_UPS : n/a PD : n/a CUSTOMIZED_LED : n/a SUSPEND_LED_OFF : n/a FORCE_USB_SPEED : n/a FORCE_PCIE_SPEED : n/a EN_U1U2 : n/a FORCE_USB_QUIRK : n/a FORCE_PCIE_QUIRK : n/a FAN : n/a DIS_SHOW_EMPTY_DISK : n/a FORCE_SATA_NORMAL_DMA : n/a UART_DBG_PIN : 0x05 FINGER_PRINT_EN : n/a RM_INTERNAL_RD : n/a HS_AUTO_SWITCH : n/a UART_BAUD_RATE : n/a CUSTOMIZED_DISK_IDENTIFY : n/a HW_LED_CFG : n/a CDROM_CFG : n/a SUPPORT_HID : n/a LATE_INIT_DISK : n/a SCSI_WP_PIN : n/a SD_MMC_TYPE : n/a FORCE_PORT_TYPE : n/a BCDDEVICE : n/a SUSPEND_DISK_OFF : n/a SCSI_WB_PIN : n/a CUSTOMIZED_FEATURE : n/a Boot Mode : Flash FW Ver : 1.32.901 FW Build Date : 2022.12.07 IC Pkg Type : PCIE UUID : n/a Disconn_ForceUSB2 : false

Connexion ou Créer un compte pour participer à la conversation.

  • Shonk
  • Portrait de Shonk
  • Hors Ligne
  • Big Poster
  • Big Poster
    Enregistré
  • Messages : 79
  • Thanks: 31

Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

il y a 6 mois 1 semaine - il y a 6 mois 1 semaine
#3749
no thats after you have flashed it and its running the golden firmware as you messed something up
the info has to be pulled before you ever mess with it

read up i have provided you with a orico config file
Dernière édition: il y a 6 mois 1 semaine par Shonk.

Connexion ou Créer un compte pour participer à la conversation.

  • pt83
  • Portrait de pt83
  • Hors Ligne
  • Poster 2
  • Poster 2
    Enregistré
  • Messages : 7
  • Thanks: 0

Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

il y a 6 mois 1 semaine - il y a 6 mois 1 semaine
#3750
Your config worked. Thank you!!!. btw that is before I do flashing. Unless the manufacturer f*ckup my box, it is not me changing any info.
Dernière édition: il y a 6 mois 1 semaine par pt83.

Connexion ou Créer un compte pour participer à la conversation.

Temps de génération de la page : 0.080 secondes
Propulsé par Kunena