Hello to all of you,
To thank the work done and to allow an improvement of the site, given the low income from advertising, the site allows to live exclusively with donations, thank you for your generosity and a big thank you to those who give it to me regularly to whom I will be infinitely indebted for the maintenance of SD😉

Fdrsoft

--- SURVEY Are you satisfied with the S-D site? ---

Hello to all of you and thank you again for your loyalty,
Today I want to know if you are satisfied with the site since the change of the server and some touch-ups of the color and the change of the theme of the Forum.
Of course I am aware that there may still be work to do but the biggest part is done
Thank you for your answers
www.station-drivers.com/index.php/en/for...th-the-s-d-site#3618

lan Intel I225-V/I225-LM Rev 1.x Lan Controllers Firmware Version 1.89

  • mircolino
  • mircolino's Avatar
  • Offline
  • Poster 2
  • Poster 2
    Enregistré
  • Posts: 6
  • Thanks: 0

Re: Intel I225-V/I225-LM Rev 1.x Lan Controllers Firmware Version 1.89

1 year 1 month ago - 1 year 1 month ago
#2171
Sorry, made a mistake. How do I delete this post?
Last edit: 1 year 1 month ago by mircolino.

Please Log in or Create an account to join the conversation.

  • mircolino
  • mircolino's Avatar
  • Offline
  • Poster 2
  • Poster 2
    Enregistré
  • Posts: 6
  • Thanks: 0

Re: Intel I225-V/I225-LM Rev 1.x Lan Controllers Firmware Version 1.89

1 year 1 month ago
#2172
Can nvmupdatew64e "see" the NIC?

Can you post the content of:

nvmupdatew64e.exe -i -l yourlogname.log
Yes, nvmupdatew64e.exe can still see the NIC:

C:\>nvmupdatew64e.exe -i -l

Intel(R) Ethernet NVM Update Tool
NVMUpdate version 1.39.56.9
Copyright(C) 2013 - 2023 Intel Corporation.

Config file will not be read.
Inventory
[00:100:00:00]: Intel(R) Ethernet Controller (3) I225-V
        Alternate MAC address is not set.
        Flash inventory started.
        Shadow RAM inventory started.
        Shadow RAM inventory finished.
        Flash inventory finished.
[00:100:00:00]: Intel(R) Ethernet Controller (3) I225-V
        Vendor                 : 8086
        Device                 : 15F3
        Subvendor              : 17AA
        Subdevice              : 22D8
        Revision               : 3
        LAN MAC                : <MAC_ADDRESS>
        Alt MAC                : 000000000000
        SAN MAC                : 000000000000
        ETrackId               : 800002FC
        SerialNumber           : <SERIAL_NUMBER>
        NVM Version            : 1.137(1.89)
        PBA                    : G23456-000
        VPD status             : Not set
        VPD size               : 0
        NVM update             : No config file entry
          checksum             : Valid

Please Log in or Create an account to join the conversation.

  • Districtor
  • Districtor's Avatar
  • Offline
  • Poster 2
  • Poster 2
    Enregistré
  • Posts: 6
  • Thanks: 2

Re: Intel I225-V/I225-LM Rev 1.x Lan Controllers Firmware Version 1.89

1 year 1 month ago
#2175
Can nvmupdatew64e "see" the NIC?

Can you post the content of:

nvmupdatew64e.exe -i -l yourlogname.log
Yes, nvmupdatew64e.exe can still see the NIC:

C:\>nvmupdatew64e.exe -i -l

Intel(R) Ethernet NVM Update Tool
NVMUpdate version 1.39.56.9
Copyright(C) 2013 - 2023 Intel Corporation.

Config file will not be read.
Inventory
[00:100:00:00]: Intel(R) Ethernet Controller (3) I225-V
        Alternate MAC address is not set.
        Flash inventory started.
        Shadow RAM inventory started.
        Shadow RAM inventory finished.
        Flash inventory finished.
[00:100:00:00]: Intel(R) Ethernet Controller (3) I225-V
        Vendor                 : 8086
        Device                 : 15F3
        Subvendor              : 17AA
        Subdevice              : 22D8
        Revision               : 3
        LAN MAC                : <MAC_ADDRESS>
        Alt MAC                : 000000000000
        SAN MAC                : 000000000000
        ETrackId               : 800002FC
        SerialNumber           : <SERIAL_NUMBER>
        NVM Version            : 1.137(1.89)
        PBA                    : G23456-000
        VPD status             : Not set
        VPD size               : 0
        NVM update             : No config file entry
          checksum             : Valid
Well, what worked for me (my case was a little different):
Create nvmupdate.cfg or .txt, replace Vendor, Device etc. as needed.

Example:

CURRENT FAMILY: 1.0.0
CONFIG VERSION: 1.14.0

BEGIN DEVICE
    DEVICENAME: NNT
    VENDOR:     8086
    DEVICE:     15F3
    SUBVENDOR:  1043
    SUBDEVICE:  87D2
    NVM IMAGE:  .\FXVL_15F3.bin
    IMAGE DOWNGRADE: TRUE
END DEVICE 

Then, nvmupdatew64e.exe -u -l -c nvmupdate.txt

If this doesn't work, you can try to add the -f (force) command. It might still output an error, however the file will be "written", after a reset it should work.

Also, see this link:

advantech-ncg.zendesk.com/hc/en-us/artic...-Adapter-710-Series-

Good luck!
 
The following user(s) said Thank You: mircolino

Please Log in or Create an account to join the conversation.

  • mircolino
  • mircolino's Avatar
  • Offline
  • Poster 2
  • Poster 2
    Enregistré
  • Posts: 6
  • Thanks: 0

Re: Intel I225-V/I225-LM Rev 1.x Lan Controllers Firmware Version 1.89

1 year 1 month ago
#2178
Well, what worked for me (my case was a little different):
Create nvmupdate.cfg or .txt, replace Vendor, Device etc. as needed.

Example:

CURRENT FAMILY: 1.0.0
CONFIG VERSION: 1.14.0

BEGIN DEVICE
    DEVICENAME: NNT
    VENDOR:     8086
    DEVICE:     15F3
    SUBVENDOR:  1043
    SUBDEVICE:  87D2
    NVM IMAGE:  .\FXVL_15F3.bin
    IMAGE DOWNGRADE: TRUE
END DEVICE 

Then, nvmupdatew64e.exe -u -l -c nvmupdate.txt

If this doesn't work, you can try to add the -f (force) command. It might still output an error, however the file will be "written", after a reset it should work.

Good luck!
 
It worked! 😅
I think what I was missing was the "IMAGE DOWNGRADE: TRUE" entry in the config file. Thank you so much! 🙏🏻

For posterity, if you updated your Intel NUC I225 NIC with the ASUS 1.89 NVM image on this thread, and your NIC started misbehaving (mine kept disappearing after a reboot), assuming you created a backup of the previous EEPROM/NVM images with the command:

eeupdatew64e.exe /nic=1 /dump

The following will bring your NIC back to factory:

Create the following nvmupdate.cfg file:

CURRENT FAMILY: 1.0.0
CONFIG VERSION: 1.14.0

BEGIN DEVICE
DEVICENAME: NNT
VENDOR: 8086
DEVICE: 15F3
SUBVENDOR: 17AA
SUBDEVICE: 22D8
NVM IMAGE: .\<MAC_ADDRESS>.bin
IMAGE DOWNGRADE: TRUE
END DEVICE


Execute the following commands:

eeupdatew64e.exe /nic=1 /d .\<MAC_ADDRESS>.eep
nvmupdatew64e.exe -u -l -f -c nvmupdate.cfg

the NVM flash will fail but after you reset the NIC with the command below and power-cycle the NUC the I225 should be reset to factory

eeupdatew64e.exe /nic=1 /adapterreset

Use the following commands to verify everything is OK:

eeupdatew64e.exe /nic=1 /eepromver
eeupdatew64e.exe /nic=1 /adapterinfo
nvmupdatew64e.exe -i -l

 

Please Log in or Create an account to join the conversation.

  • Avirun
  • Avirun's Avatar
  • Offline
  • Newbie
  • Newbie
    Enregistré
  • Posts: 2
  • Thanks: 0

Re: Intel I225-V/I225-LM Rev 1.x Lan Controllers Firmware Version 1.89

1 year 1 month ago
#2182
I sent a message to yor e-mail, thx to your response.

Please Log in or Create an account to join the conversation.

Time to create page: 0.081 seconds
Powered by Kunena Forum