ssd Asmedia ASM-2362 NVMe/USB 3.1 Controller firmware Version 201012_91_00_00

The Price isnt that good its £21.82 delivered for a cheap looking enclosure
look at that pcb it looks like i made it at pcbway

I picked up an Integral 256GB USB3.2 Type-C Ultima Pro X 2 a few months ago for £25
Which is a Turnkey Phison PU31-Pro made directly by phison
that oem's then buy and badge
It comes with two Very High Quality Cables and a Case

Its an ASM2364 with a Phison E13 with 256GB of Toshiba 96L TLC
I pulled the drive and replaced it with a 1TB Kioxia Exceria G2 that i picked up for £29.99




 
Last Edit:3 months 4 days ago by Shonk
Last edit: 3 months 4 days ago by Shonk.

Please Log in or Create an account to join the conversation.

I have one of these coming from aliexpress for messing with
to see if i can clone every setting on my PU31 Pro Firmware
it was like £10 delivered

It has an asm2364 im hopeing for a newer firmware on it that i can dump for my Phison PU31 Pro

Will post it here if its newer

It should be here in 3 days

Last Edit:3 months 1 week ago by Shonk
Last edit: 3 months 1 week ago by Shonk.
The following user(s) said Thank You: admin

Please Log in or Create an account to join the conversation.

Here are two firmware's dumped from my devices

AS_PCIE_200505_90_00_00.bin (My Phison PU31-Pro) 05 May 2020
AS_PCIE_201012_91_00_00.bin (Silverstone MS12) 12 October 2020
AS_PCIE_210901_91_00_00.bin (My Samget Enclosure) 01 September 2021

Dumped with Asmedia_FW_Dumper_0.21a
130 bytes at start of file removed (My NvRam)
Padding at the end of the file removed

for the dumps to be flashable they have to be named correctly (which they are)

It was simple to clone the NVRAM
the first 4 bytes are hard coded to the hardware so they stay the same
00 40 10 FF on the Phison PU31-Pro
00 60 13 FF on the Samget

The rest was just
VID
PID
Serial Number
EP0 M.String
EP0 P.String
T10 M.String
T10 P.String
Idle Timer = Never
nothing extra in the ini needed to be changed

I Removed the Customization Integral added and renamed it from
Integral PU31-Pro to Phison PU31-Pro (thats what Phison sets them as by default)
to match my Phison PU31 (JMS583) (That AXE didnt customize to AXE PU31)



With Silverstone MS12 Updater Config
mega.nz/file/NzBgXIQS#4xC0QBko-UbtbDi-IA...OZI1_5tRpcobsU_NyTNE

With Phison PU31-Pro Updater Config
mega.nz/file/A6oUWADA#wJF4atIrkpd6lvZs82...KqVepszNCfg_xrS4pU5k

You can use either..



Last Edit:3 months 2 hours ago by Shonk
Last edit: 3 months 2 hours ago by Shonk.

Please Log in or Create an account to join the conversation.

I tried uploading the firmware to the main site but it gives me error's i have reached my limit and such
can  you upload it admin..
by Shonk

Please Log in or Create an account to join the conversation.

MPTool not recognizing my ASM2364 in an Orico 20Gbps Enclosure
I tried all different firmware update tools I can find - 19xxxx, 20xxxx and 21xxxx but none of them would show my ASM2364. Tried with and without drive, same problem.
Clicking Start button does nothing - the progress bar is stuck at 0%.
Anyone has the same problem?  Please help me out because I need to update its firmware to at least 19xxxx to use it with flashid. Thanks!
Last Edit:2 months 5 days ago by Vurmiraaz
Attachments:
Last edit: 2 months 5 days ago by Vurmiraaz.

Please Log in or Create an account to join the conversation.

Time to create page: 1.322 seconds
Powered by Kunena Forum