hdd2 JMS583 chip

  • admin
  • admin's Avatar Offline Topic Author
  • Admin
  • Admin
    Administrateur
  • Posts: 499
  • Thanks: 202

JMS583 chip was created by admin

Posted 1 year 4 months ago #228
Email report
Good morning and congratulations on the site :)
I recently bought this enclosure it.aliexpress.com/item/1005001697543655....00017197644412%22%7D with JMS583 chip. I downloaded from your site first jms583_FWUpdate_Utility_0209.zip (and applied) and then jms583_20.05.00.01 (station-drivers.com).zip (and applied). I wanted to know if I did well. If I launch jms583_FWUpdate_Utility_0209 (the first FW applied) tells me: 


even if the enclosure works and is connected. Thank you very much Max


Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060,  Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.

Last Edit:1 year 4 months ago by admin
Last edit: 1 year 4 months ago by admin.

Please Log in or Create an account to join the conversation.

  • admin
  • admin's Avatar Offline Topic Author
  • Admin
  • Admin
    Administrateur
  • Posts: 499
  • Thanks: 202

Replied by admin on topic JMS583 chip

Posted 1 year 4 months ago #229
Hi Max,
To update, plug it into a USB 2.0 port preferably because on USB 3.0 ports it may not be recognized
Also check the Version that corresponds to the series ex: 21.x or 2.x


Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060,  Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.

by admin

Please Log in or Create an account to join the conversation.

  • admin
  • admin's Avatar Offline Topic Author
  • Admin
  • Admin
    Administrateur
  • Posts: 499
  • Thanks: 202

Replied by admin on topic JMS583 chip

Posted 1 year 4 months ago #230


Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060,  Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.

by admin

Please Log in or Create an account to join the conversation.

Replied by Max88 on topic JMS583 chip

Posted 1 year 4 months ago #231
Hi,
So, with the FW jms583_FWUpdate_Utility_0209.zip everything worked, then I was curious and I wanted to update with jms583_20.05.00.01 (station-drivers.com).zip and it also works now. My doubt is that I don't know if I was right to update from 0209 to 20.05.00.01

This is what I see:  ibb.co/WD7Hf34

 
Last Edit:1 year 4 months ago by Max88
Last edit: 1 year 4 months ago by Max88.

Please Log in or Create an account to join the conversation.

Replied by Max88 on topic JMS583 chip

Posted 1 year 4 months ago #232
Now if i start jms583_FWUpdate_Utility_0209 with the enclosure connected on both USB 2 and USB 3, I get this: ibb.co/QYN5Bjj

But everything works, the only thing is that the transfers are fluctuating, not linear as speed, but this even before and I thought to solve with these firmware

Probably that message gives it to me because I now have a more updated firmware (20.05.00.01) and therefore FW jms583_FWUpdate_Utility_0209 cannot detect it ... boh
 
Last Edit:1 year 4 months ago by Max88
Last edit: 1 year 4 months ago by Max88.

Please Log in or Create an account to join the conversation.

Time to create page: 0.735 seconds
Powered by Kunena Forum