lan Intel I225-V/I225-LM Rev 1.x Lan Controllers Firmware Version 1.89

  • admin
  • admin 的個人頭像 离线 Topic Author
  • Admin
  • Admin
    Administrateur
  • 文章: 541
  • Thanks: 242
Hi
have you installed the drivers of the pack
have you ever tried to update?


Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060,  Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.

來自 admin

Please 登錄新增帳號 to join the conversation.

Yes I installed the driver in the pack, I had a update a while ago but it was in a bios update, I think the ethernet is dead completely which is why it cant find it.
來自 goose280672

Please 登錄新增帳號 to join the conversation.

  • admin
  • admin 的個人頭像 离线 Topic Author
  • Admin
  • Admin
    Administrateur
  • 文章: 541
  • Thanks: 242
Go to the setup to see if it is well recognized
At the device manager level, is it detected?
Have you tried to reflash with the bios?
Also check if the network port the LEDs are active ?


Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060,  Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.

Last Edit:1 年 2 天 前 來自 admin
Last edit: 1 年 2 天 前 by admin.

Please 登錄新增帳號 to join the conversation.

Was trying all day yesterday to get it working, there is no LEDs active on the back, I have tested the cable with a laptop and its working fine, I have reflashed multiple bioses, this is what device manager shows me.

來自 goose280672

Please 登錄新增帳號 to join the conversation.

  • admin
  • admin 的個人頭像 离线 Topic Author
  • Admin
  • Admin
    Administrateur
  • 文章: 541
  • Thanks: 242
Thx, ok so no trace normally in the bios there is an option that allows you to deactivate it can you see if it is active or not


Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060,  Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.

來自 admin

Please 登錄新增帳號 to join the conversation.

建立頁面時間:0.730 秒
討論區核心: Kunena 論壇