ssd NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

  • Troytrn
  • Troytrn 的個人頭像
  • Offline
  • Newbie
  • Newbie
    Enregistré
  • 文章: 2
  • Thanks: 0

Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

5 小時 16 分鐘 前
#5132
Hello Admin,I have another question. I own an SSD named Fikwot FN970 (which is essentially the same as the Fanxiang S770) using an Innogrit IG5236 controller and YMTC NAND. I also have an SSD enclosure branded ITGZ, which uses the Realtek RTL9210B controller with firmware version 1.34.29.When I connect the SSD to the enclosure and plug it into my computer, the drive is not recognized. However, when I cross-test by putting the same SSD into a ROG enclosure or using a WD SN5000 SSD with the ITGZ box, everything works normally.So my question is: does the RTL9210B controller have compatibility issues with the Innogrit IG5236? Or is it possible that I’m not using the correct firmware for the enclosure to properly detect this SSD?Thank you in advance for your support!

Please 登錄 or 新增帳號 to join the conversation.

  • admin
  • admin 的個人頭像 Topic Author
  • Offline
  • Admin
  • Admin
    Administrateur
  • 文章: 389
  • Thanks: 181

Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

4 小時 38 分鐘 前
#5133
Hi, there are two possibilities: either the SSD disk firmware has a bug and therefore update it, or try the latest firmware because the firmware allows support for new SSDs or corrects compatibility problems.

Configuration
Gigabyte Z890 Master, Intel Cpu Core Ultra 7 265K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX4060,  Alimentation Gigabyte 850W, Samsung SSD 990 Pro, SSD9100 Pro, Clavier Razer Black Window , Souris Razer, Boitier NZXT H6, HP Steelserie, Free Fibre Ultra (8Go/8Go), Lan 10Gb, Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.

Please 登錄 or 新增帳號 to join the conversation.

  • Stasiz
  • Stasiz 的個人頭像
  • Offline
  • Poster 2
  • Poster 2
    Enregistré
  • 文章: 8
  • Thanks: 3

Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

3 小時 28 分鐘 前
#5134
enclosure to properly detect this SSD
It's a bad idea to use a very hot SSD as a portable drive. There may simply not be enough power from the USB or the DC-DC converter on board.

Please 登錄 or 新增帳號 to join the conversation.

  • Shonk
  • Shonk 的個人頭像
  • Offline
  • Big Poster
  • Big Poster
    Enregistré
  • 文章: 98
  • Thanks: 39

Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

3 小時 1 分鐘 前
#5135
I have a Fanxiang S770 2TB in an ASM2364 which works fine if that helps

Please 登錄 or 新增帳號 to join the conversation.

  • admin
  • admin 的個人頭像 Topic Author
  • Offline
  • Admin
  • Admin
    Administrateur
  • 文章: 389
  • Thanks: 181

Re: NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

1 小時 58 分鐘 前
#5136
As Shonk said, all you have to do is install the latest firmware.

Configuration
Gigabyte Z890 Master, Intel Cpu Core Ultra 7 265K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX4060,  Alimentation Gigabyte 850W, Samsung SSD 990 Pro, SSD9100 Pro, Clavier Razer Black Window , Souris Razer, Boitier NZXT H6, HP Steelserie, Free Fibre Ultra (8Go/8Go), Lan 10Gb, Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.

Please 登錄 or 新增帳號 to join the conversation.

建立頁面時間:0.079 秒
討論區核心: Kunena 論壇