S.M.A.R.T display not reading properly after updating (Fanxiang MD-86)

rococoricoco
Tắt
Poster 2
Enregistré
Tổng số bài viết: 5
Thanks: 0

Re: Realtek RTL9210(B) NVMe/USB 3.1 Controller firmware Version 1.34.29.011325

1 thÃ¡ng 4 tuáº§n trÆ°á»›c - 1 thÃ¡ng 3 tuáº§n trÆ°á»›c

#4639

But I have previously upgraded to version 1.32.xxxxxx and nothing happened. The S.M.A.R.T display feature is working properly. Is it because I checked the PG to update? Because the dump file is a little bit different when I compare it before and after.

Last edit: 1 thÃ¡ng 3 tuáº§n trÆ°á»›c by rococoricoco.

Vui lòng Đăng nhập hoặc Tạo tài khoản để tham gia cuộc hội thoại.

admin
Topic Author
Tắt
Admin
Administrateur
Tổng số bài viết: 356
Thanks: 138

Re: S.M.A.R.T display not reading properly after updating (Fanxiang MD-86)

1 thÃ¡ng 4 tuáº§n trÆ°á»›c - 1 thÃ¡ng 4 tuáº§n trÆ°á»›c

#4640

If the display isn't working at first, it's likely due to a disk compatibility issue and firmware.

Shonk is the best person to answer this question.

Configuration

Gigabyte Z890 Master, Intel Cpu Core Ultra 7 265K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX4060, Alimentation Gigabyte 850W, Samsung SSD 990 Pro, SSD9100 Pro, Clavier Razer Black Window , Souris Razer, Boitier NZXT H6, HP Steelserie, Free Fibre Ultra (8Go/8Go), Lan 10Gb, Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.

Last edit: 1 thÃ¡ng 4 tuáº§n trÆ°á»›c by admin.

Vui lòng Đăng nhập hoặc Tạo tài khoản để tham gia cuộc hội thoại.

rococoricoco
Tắt
Poster 2
Enregistré
Tổng số bài viết: 5
Thanks: 0

Re: Realtek RTL9210(B) NVMe/USB 3.1 Controller firmware Version 1.34.29.011325

1 thÃ¡ng 3 tuáº§n trÆ°á»›c - 1 thÃ¡ng 3 tuáº§n trÆ°á»›c

#4664

Hope he sees this post and can help. I’m very frustated with this.

Last edit: 1 thÃ¡ng 3 tuáº§n trÆ°á»›c by rococoricoco.

Vui lòng Đăng nhập hoặc Tạo tài khoản để tham gia cuộc hội thoại.

Laroldski
Tắt
Big Poster
Enregistré
Tổng số bài viết: 55
Thanks: 12

Re: Realtek RTL9210(B) NVMe/USB 3.1 Controller firmware Version 1.34.29.011325

1 thÃ¡ng 3 tuáº§n trÆ°á»›c - 1 thÃ¡ng 3 tuáº§n trÆ°á»›c

#4678

rococoricoco Ä‘Ã£ viáº¿t:

Hope he sees this post and can help. I’m very frustated with this.

If your enclosure can't be fixed you may want to look at these enclosure's,I have had good luck with JEYI enclosure's plus you can purchase replacement PCB boards if the USB-C connector get's damaged.

This JEYI enclosure is better then most from what I have found because the backplate is around 2.5mm thick and carries away the heat better.

www.aliexpress.com/item/1005005977099067...arch%7Cquery_from%3A

These are replacement PCB boards you can get that are a direct fit.

www.aliexpress.com/item/1005008197399518...arch%7Cquery_from%3A

Last edit: 1 thÃ¡ng 3 tuáº§n trÆ°á»›c by Laroldski. Lý do: Forgot to include a second link.

Vui lòng Đăng nhập hoặc Tạo tài khoản để tham gia cuộc hội thoại.

halveeen
Tắt
Newbie
Enregistré
Tổng số bài viết: 1
Thanks: 0

Re: Realtek RTL9210(B) NVMe/USB 3.1 Controller firmware Version 1.34.29.011325

3 tuáº§n 2 ngÃ y trÆ°á»›c

#4852

Hello everyone, please I need help

My SSD Case "RTL9210B-CG firmware version (22.1d / 1.34.29)" only works on USB 2.0 once its connected to usb3.1 I see the device in device manager but the SSD will not appear in file explorer

Original Dump

Code:

**************************************************************
Device : [Port2] : Realtek RTL9210B-CG #0
**************************************************************
U2PHY : n/a
U3PHY : n/a
VID : 0x0bda
PID : 0x9210
MANUFACTURE : "Realtek"
PRODUCT : "RTL9210B-CG"
SERIAL : "012345679457"
SCSI_PRODUCT : "RTL9210B-CG     "
SCSI_VENDOR : "Realtek "
LED : 0x02
DISK_IPS_THRES : 0x0a
CUSTOMIZED_LED : 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00 
UART_DBG_PIN : 0x05
...
Boot Mode : Flash
FW Ver : 1.32.70
FW Build Date : 2023.07.06
IC Pkg Type : PCIE/SATA
Disconn_ForceUSB2 : false
...

Truncated for brevity...I removed all that had n/a

New firmware installed today dump

Code:

**************************************************************
Device : [Port2] : Realtek RTL9210B-CG #0
**************************************************************
U2PHY : n/a
U3PHY : n/a
VID : 0x0bda
PID : 0x9210
MANUFACTURE : "Realtek"
PRODUCT : "RTL9210B-CG"
SERIAL : "012345679458"
SCSI_PRODUCT : "RTL9210B-CG     "
SCSI_VENDOR : "Realtek "
USB_SELF_PWR : n/a
DISK_HOTPLUG : n/a
LED : n/a
PINMUX1 : n/a
PINMUX2 : n/a
U2_MAXPWR : n/a
U3_MAXPWR : n/a
ASPMDIS : n/a
PCIE_REFCLK : n/a
DISK_IPS_THRES : n/a
SWR_1_2V : n/a
EN_UPS : n/a
PD : n/a
CUSTOMIZED_LED : 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00 
SUSPEND_LED_OFF : n/a
FORCE_USB_SPEED : n/a
FORCE_PCIE_SPEED : n/a
EN_U1U2 : n/a
FORCE_USB_QUIRK : n/a
FORCE_PCIE_QUIRK : n/a
FAN : n/a
DIS_SHOW_EMPTY_DISK : n/a
FORCE_SATA_NORMAL_DMA : n/a
UART_DBG_PIN : 0x05
FINGER_PRINT_EN : n/a
RM_INTERNAL_RD : n/a
HS_AUTO_SWITCH : n/a
UART_BAUD_RATE : n/a
CUSTOMIZED_DISK_IDENTIFY : n/a
HW_LED_CFG : n/a
CDROM_CFG : n/a
SUPPORT_HID : n/a
LATE_INIT_DISK : n/a
SCSI_WP_PIN : n/a
SD_MMC_TYPE : n/a
FORCE_PORT_TYPE : n/a
BCDDEVICE : n/a
SUSPEND_DISK_OFF : n/a
SCSI_WB_PIN : n/a
CUSTOMIZED_FEATURE : n/a
PERIPH_API : n/a
RAID_CFG : n/a

Boot Mode : Flash
FW Ver : 1.34.29
FW Build Date : 2025.01.13
IC Pkg Type : PCIE/SATA
UUID : n/a

Disconn_ForceUSB2 : false

I don't know if I am posting this in the right channel, just signed up today...but yh I need help figuring why my SSD does not work on USB3 only USB 2

Vui lòng Đăng nhập hoặc Tạo tài khoản để tham gia cuộc hội thoại.

News

Top Download

S.M.A.R.T display not reading properly after updating (Fanxiang MD-86)

Re: Realtek RTL9210(B) NVMe/USB 3.1 Controller firmware Version 1.34.29.011325

Re: S.M.A.R.T display not reading properly after updating (Fanxiang MD-86)

Re: Realtek RTL9210(B) NVMe/USB 3.1 Controller firmware Version 1.34.29.011325

Re: Realtek RTL9210(B) NVMe/USB 3.1 Controller firmware Version 1.34.29.011325

Re: Realtek RTL9210(B) NVMe/USB 3.1 Controller firmware Version 1.34.29.011325