Realtek RTL9220(VA/VB) NVMe/USB 3.2 Controller firmware Version 9.34.55
- sdefrwggerg
-
- Çevrim dışı
- Big Poster
-
Enregistré
- İletiler: 42
- Thanks: 22
Re: Realtek RTL9220(VA/VB) NVMe/USB 3.2 Controller firmware Version 9.34.55
2 hafta 5 gün önce
UGREEN Housing with an RGB light strip. When the housing transmits data, the color gradient of the RGB light is automatically generated.
So they RGB IC communicates with RTL via bus to change the light. So you need Special Firmware or / and API communication and i think it is different to sabrent.
So they RGB IC communicates with RTL via bus to change the light. So you need Special Firmware or / and API communication and i think it is different to sabrent.
Şu kullanıcı(lar) teşekkür etti: programervn
Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.
- admin
-
Konu yazarı
- Çevrim dışı
- Admin
-
Administrateur
- İletiler: 443
- Thanks: 211
Re: Realtek RTL9220(VA/VB) NVMe/USB 3.2 Controller firmware Version 9.34.55
2 hafta 5 gün önce - 2 hafta 5 gün önceYes, the Ugreen case is definitely more beautiful, I think.
on the other hand it heats up hence I added silicone paste above (normal) but below and under the realtek chipset to have contact with the aluminum case
Configuration
Gigabyte Z890 Master, Intel Cpu Core Ultra 7 265K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX4060, Alimentation Gigabyte 850W, Samsung SSD 990 Pro, SSD9100 Pro, Clavier Razer Black Window , Souris Razer, Boitier NZXT H6, HP Steelserie, Free Fibre Ultra (8Go/8Go), Lan 10Gb, Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
Son düzenleme: 2 hafta 5 gün önce Düzenleyen:admin
Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.
- programervn
-
- Çevrim dışı
- poster 4
-
Enregistré
- İletiler: 17
- Thanks: 2
Re: Realtek RTL9220(VA/VB) NVMe/USB 3.2 Controller firmware Version 9.34.55
2 hafta 4 gün önce
You can remove the mainboard by releasing the clips as shown in the picture I shared in the previous post. However, it’s very difficult to keep the case in its original condition, as it will get scratched when pried open. I managed to remove it successfully and added a thermal pad for the chipset. The sturdy design makes it quite difficult to take apart
Yes, the Ugreen case is definitely more beautiful, I think.
on the other hand it heats up hence I added silicone paste above (normal) but below and under the realtek chipset to have contact with the aluminum case
Şu kullanıcı(lar) teşekkür etti: admin
Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.
Sayfa oluşturma süresi: 0.083 saniye