News

Downloads: 308
Downloads: 180
Downloads: 685
Downloads: 147
Downloads: 953

Top Download

Downloads: 57301
Downloads: 25536
Downloads: 22340
Downloads: 20428
Downloads: 19882

ssd S.M.A.R.T display not reading properly after updating (Fanxiang MD-86)

Re: Realtek RTL9210(B) NVMe/USB 3.1 Controller firmware Version 1.34.29.011325

1 ay 4 hafta önce - 1 ay 3 hafta önce
#4639
But I have previously upgraded to version 1.32.xxxxxx and nothing happened. The S.M.A.R.T display feature is working properly. Is it because I checked the PG to update? Because the dump file is a little bit different when I compare it before and after.
Son düzenleme: 1 ay 3 hafta önce Düzenleyen:rococoricoco

Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.

  • admin
  • admin kullanıcısının avatarı Konu yazarı
  • Çevrim dışı
  • Admin
  • Admin
    Administrateur
  • İletiler: 356
  • Thanks: 138

Re: S.M.A.R.T display not reading properly after updating (Fanxiang MD-86)

1 ay 4 hafta önce - 1 ay 4 hafta önce
#4640
If the display isn't working at first, it's likely due to a disk compatibility issue and firmware.
  • Shonk   is the best person to answer this question. 
    [img
Configuration
Gigabyte Z890 Master, Intel Cpu Core Ultra 7 265K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX4060,  Alimentation Gigabyte 850W, Samsung SSD 990 Pro, SSD9100 Pro, Clavier Razer Black Window , Souris Razer, Boitier NZXT H6, HP Steelserie, Free Fibre Ultra (8Go/8Go), Lan 10Gb, Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
Son düzenleme: 1 ay 4 hafta önce Düzenleyen:admin

Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.

Re: Realtek RTL9210(B) NVMe/USB 3.1 Controller firmware Version 1.34.29.011325

1 ay 3 hafta önce - 1 ay 3 hafta önce
#4664
Hope he sees this post and can help. I’m very frustated with this.
Son düzenleme: 1 ay 3 hafta önce Düzenleyen:rococoricoco

Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.

Re: Realtek RTL9210(B) NVMe/USB 3.1 Controller firmware Version 1.34.29.011325

1 ay 3 hafta önce - 1 ay 3 hafta önce
#4678
rococoricoco yazdı:
Hope he sees this post and can help. I’m very frustated with this.

If your enclosure can't be fixed you may want to look at these enclosure's,I have had good luck with JEYI enclosure's plus you can purchase replacement PCB boards if the USB-C connector get's damaged.

This JEYI enclosure is better then most from what I have found because the backplate is around 2.5mm thick and carries away the heat better.

www.aliexpress.com/item/1005005977099067...arch%7Cquery_from%3A

These are replacement PCB boards you can get that are a direct fit.

www.aliexpress.com/item/1005008197399518...arch%7Cquery_from%3A

 
Son düzenleme: 1 ay 3 hafta önce Düzenleyen:Laroldski Neden: Forgot to include a second link.

Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.

Re: Realtek RTL9210(B) NVMe/USB 3.1 Controller firmware Version 1.34.29.011325 

3 hafta 1 gün önce
#4852
Hello everyone, please I need help

My SSD Case "RTL9210B-CG  firmware version (22.1d / 1.34.29)" only works on USB 2.0 once its connected to usb3.1 I see the device in device manager but the SSD will not appear in file explorer

Original Dump
Code:
************************************************************** Device : [Port2] : Realtek RTL9210B-CG #0 ************************************************************** U2PHY : n/a U3PHY : n/a VID : 0x0bda PID : 0x9210 MANUFACTURE : "Realtek" PRODUCT : "RTL9210B-CG" SERIAL : "012345679457" SCSI_PRODUCT : "RTL9210B-CG     " SCSI_VENDOR : "Realtek " LED : 0x02 DISK_IPS_THRES : 0x0a CUSTOMIZED_LED : 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00  UART_DBG_PIN : 0x05 ... Boot Mode : Flash FW Ver : 1.32.70 FW Build Date : 2023.07.06 IC Pkg Type : PCIE/SATA Disconn_ForceUSB2 : false ...


Truncated for brevity...I removed all that had n/a

New firmware installed today dump
Code:
************************************************************** Device : [Port2] : Realtek RTL9210B-CG #0 ************************************************************** U2PHY : n/a U3PHY : n/a VID : 0x0bda PID : 0x9210 MANUFACTURE : "Realtek" PRODUCT : "RTL9210B-CG" SERIAL : "012345679458" SCSI_PRODUCT : "RTL9210B-CG     " SCSI_VENDOR : "Realtek " USB_SELF_PWR : n/a DISK_HOTPLUG : n/a LED : n/a PINMUX1 : n/a PINMUX2 : n/a U2_MAXPWR : n/a U3_MAXPWR : n/a ASPMDIS : n/a PCIE_REFCLK : n/a DISK_IPS_THRES : n/a SWR_1_2V : n/a EN_UPS : n/a PD : n/a CUSTOMIZED_LED : 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00  SUSPEND_LED_OFF : n/a FORCE_USB_SPEED : n/a FORCE_PCIE_SPEED : n/a EN_U1U2 : n/a FORCE_USB_QUIRK : n/a FORCE_PCIE_QUIRK : n/a FAN : n/a DIS_SHOW_EMPTY_DISK : n/a FORCE_SATA_NORMAL_DMA : n/a UART_DBG_PIN : 0x05 FINGER_PRINT_EN : n/a RM_INTERNAL_RD : n/a HS_AUTO_SWITCH : n/a UART_BAUD_RATE : n/a CUSTOMIZED_DISK_IDENTIFY : n/a HW_LED_CFG : n/a CDROM_CFG : n/a SUPPORT_HID : n/a LATE_INIT_DISK : n/a SCSI_WP_PIN : n/a SD_MMC_TYPE : n/a FORCE_PORT_TYPE : n/a BCDDEVICE : n/a SUSPEND_DISK_OFF : n/a SCSI_WB_PIN : n/a CUSTOMIZED_FEATURE : n/a PERIPH_API : n/a RAID_CFG : n/a Boot Mode : Flash FW Ver : 1.34.29 FW Build Date : 2025.01.13 IC Pkg Type : PCIE/SATA UUID : n/a Disconn_ForceUSB2 : false


I don't know if I am posting this in the right channel, just signed up today...but yh I need help figuring why my SSD does not work on USB3 only USB 2

Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.

Sayfa oluşturma süresi: 0.080 saniye
Güç veren Kunena forum