Hello everyone

I wanted to thank those who regularly donate to me so I don't forget them, and if SD continues, it's thanks to them too.
A BIG thank you to all of you.😉 Fdrsoft

ssd S.M.A.R.T display not reading properly after updating (Fanxiang MD-86)

Re: Realtek RTL9210(B) NVMe/USB 3.1 Controller firmware Version 1.34.29.011325

1 semana 6 días antes - 1 semana 4 días antes
#4639
But I have previously upgraded to version 1.32.xxxxxx and nothing happened. The S.M.A.R.T display feature is working properly. Is it because I checked the PG to update? Because the dump file is a little bit different when I compare it before and after.
Última Edición: 1 semana 4 días antes por rococoricoco.

Por favor, Conectar o Crear cuenta para unirse a la conversación.

  • admin
  • Avatar de admin Autor del tema
  • Ausente
  • Admin
  • Admin
    Administrateur
  • Mensajes: 319
  • Thanks: 109

Re: S.M.A.R.T display not reading properly after updating (Fanxiang MD-86)

1 semana 6 días antes - 1 semana 6 días antes
#4640
If the display isn't working at first, it's likely due to a disk compatibility issue and firmware.
  • Shonk   is the best person to answer this question. 

Configuration
Gigabyte Z890 Master, Intel Cpu Core Ultra 7 265K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX4060,  Alimentation Gigabyte 850W, Samsung SSD 990 Pro, SSD9100 Pro, Clavier Razer Black Window , Souris Razer, Boitier NZXT H6, HP Steelserie, Free Fibre Ultra (8Go/8Go), Lan 10Gb, Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
Última Edición: 1 semana 6 días antes por admin.

Por favor, Conectar o Crear cuenta para unirse a la conversación.

Re: Realtek RTL9210(B) NVMe/USB 3.1 Controller firmware Version 1.34.29.011325

1 semana 4 días antes - 1 semana 4 días antes
#4664
Hope he sees this post and can help. I’m very frustated with this.
Última Edición: 1 semana 4 días antes por rococoricoco.

Por favor, Conectar o Crear cuenta para unirse a la conversación.

Re: Realtek RTL9210(B) NVMe/USB 3.1 Controller firmware Version 1.34.29.011325

1 semana 10 horas antes - 1 semana 10 horas antes
#4678
Hope he sees this post and can help. I’m very frustated with this.

If your enclosure can't be fixed you may want to look at these enclosure's,I have had good luck with JEYI enclosure's plus you can purchase replacement PCB boards if the USB-C connector get's damaged.

This JEYI enclosure is better then most from what I have found because the backplate is around 2.5mm thick and carries away the heat better.

www.aliexpress.com/item/1005005977099067...arch%7Cquery_from%3A

These are replacement PCB boards you can get that are a direct fit.

www.aliexpress.com/item/1005008197399518...arch%7Cquery_from%3A

 
Última Edición: 1 semana 10 horas antes por Laroldski. Razón: Forgot to include a second link.

Por favor, Conectar o Crear cuenta para unirse a la conversación.

Tiempo de carga de la página: 0.078 segundos
Gracias a Foro Kunena