Question NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
Replied by romeojr on topic NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
Posted 7 months 2 weeks ago #2117
I tried the 1.32.87.....same thing, no led, no touch button
by romeojr
Please Log in or Create an account to join the conversation.
Replied by TheGiolly on topic NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
Posted 7 months 2 weeks ago #2118Did you update the Realtek firmware and then it stopped working?Hi everyone!!!
I have a JEYI model I9X, it´s have a screen that shows informations about the ssd, and a finger touch to change the screen.
The led ( the green one, on the left side) is not turning on, and the touch button is not working (on the right side) , anyone have the correct configuration for him?
can please send to me or show me how to fix?
Thanks a lot!
Or it wasn't wasn't already working?
Last Edit:7 months 2 weeks ago
by TheGiolly
Last edit: 7 months 2 weeks ago by TheGiolly.
Please Log in or Create an account to join the conversation.
Replied by romeojr on topic NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
Posted 7 months 2 weeks ago #2119
It wasn´t work, I´m trying to fix upgrading the firmware, i tried somes but no changes......can someone send me the dump file from one that´s working?
by romeojr
Please Log in or Create an account to join the conversation.
- galaxyinfire
- Offline
- Newbie
-
Enregistré
- Posts: 1
- Thanks: 0
Replied by galaxyinfire on topic NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
Posted 7 months 1 week ago #2141
Hello, i have troubling with rtl9210b-cg and micron sata ssd 1Tb on windows 11, only woking with usb 2.0(as usb mass storage). In same time unknown chinese sata ssd 120gb working propertly over usap.
I understand little about the topic of controllers and usb and my question: is any way to disable usap(on controller.. config?) to using bot with usb 3.+ ?
I understand little about the topic of controllers and usb and my question: is any way to disable usap(on controller.. config?) to using bot with usb 3.+ ?
by galaxyinfire
Please Log in or Create an account to join the conversation.
Replied by flexman on topic NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx
Posted 7 months 1 day ago #2201
UnionSine MD202 (RTL9210B) NVME USB BOX factory firmware 1.29.12, has been updated to 1.32.49
Checking connection on a laptop with a 7840HS, two USB C 3.2 Gen 2 ports. On the left port box works only in USB2 mode, when the cable is turned over to the other side - box is not detected at all, on the right port it works correctly in any position of the cable. Another USB>MSATA box on JMICRON with the same cable works in USB3 mode in any position.
Maybe something needs to be corrected in the box config?
Checking connection on a laptop with a 7840HS, two USB C 3.2 Gen 2 ports. On the left port box works only in USB2 mode, when the cable is turned over to the other side - box is not detected at all, on the right port it works correctly in any position of the cable. Another USB>MSATA box on JMICRON with the same cable works in USB3 mode in any position.
Maybe something needs to be corrected in the box config?
config
Code:
;Configure Start
;=================FW Configure=================
U2PHY = 02 f4 9b e0 e1
U3PHY = 02 d4 09 00 d5 00 80
VID = 0xbda
PID = 0x9210
DISK_HOTPLUG = 0x00
DISK_IPS_THRES = 0x0a
MANUFACTURE = "UnionSine"
SCSI_VENDOR = "UnionSine"
PRODUCT = "MD202"
SCSI_PRODUCT = "UnionSine MD202"
SERIAL = "01234567XXXX"
LED = 0x02
SUSPEND_LED_OFF = 0x01
PINMUX1 = 0x0
PINMUX2 = 0x70
U2_MAXPWR = 0xfa
U3_MAXPWR = 0x00
ASPMDIS = 0x00
UART_DBG_PIN = 0x05
;=================Tool Configure=================
;DISCONN_FORCE_USB2 = n
FORMAT_DISK = n
;INC_SERIAL = y
;PARTITION: GPT, MBR
PARTITION = "MBR"
;FORMAT: NTFS, exFAT
FORMAT = "NTFS"
;LABEL max allowed - characters
LABEL = "UnionSine"
Last Edit:7 months 1 day ago
by flexman
Last edit: 7 months 1 day ago by flexman.
Please Log in or Create an account to join the conversation.
Time to create page: 1.099 seconds