ssd Question NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

Replied by Galixte on topic NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

Posted 9 months 3 days ago #1626
Yes, a .ini file.

But it’s not the subject in this topic, so please open a new topic here: :  www.station-drivers.com/index.php/en/for...es-nvme-sata-usb-3-x especially for the ASMedia chipset of your USB enclosure
Last Edit:9 months 3 days ago by Galixte
Last edit: 9 months 3 days ago by Galixte.

Please Log in or Create an account to join the conversation.

Replied by wade7575 on topic NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

Posted 9 months 3 days ago #1628
This message contains secure information

Please Log in or Create an account to join the conversation.

Replied by zLOBster on topic NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

Posted 8 months 2 weeks ago #1749
Hello
Maiwo K1687P2 1.24.16
Check with Dump Service in UTHSB Lite and find what build-in "RTL9210B_CG_upqi.cfg" - another and take some diff marks.
How to take update?
Can I Ctrl+C, V data from dump and create new cfg?

;DISK_IPS_THRES = 10 vs DISK_IPS_THRES : 0x0a

;CUSTOMIZED_LED is 15 bytes
CUSTOMIZED_LED = 01 01
vs
CUSTOMIZED_LED : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

and some another fields

p, li { white-space: pre-wrap; }p, li { white-space: pre-wrap; }p, li { white-space: pre-wrap; }

Please Log in or Create an account to join the conversation.

Replied by xiaomantou on topic NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

Posted 8 months 1 week ago #1830
Where did you get “RTL9210B_CG_upqi.cfg”? It is what I am currently looking for, even the upqi can't provide that. I think upqi updated their product to the last version by using other brand's firmware and configuration. The only firmware they had is from JEYI, upqi's stock firmware seems lost.

Please Log in or Create an account to join the conversation.

Replied by viktorhun on topic NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

Posted 8 months 1 week ago #1831
Hi guys I have one of these enclosures  www.axagon.eu/en/produkty/eem2-sb2 .
And I updated the latest firmware. But now it's in read-only mode. 


luckily I was able to put the original back
and can be rewritten
Last Edit:8 months 1 week ago by viktorhun
Last edit: 8 months 1 week ago by viktorhun.

Please Log in or Create an account to join the conversation.

Time to create page: 0.692 seconds
Powered by Kunena Forum