Realtek RTL9201R Firmware 1.32.7
- jelb0
-
- Offline
- Poster 2
-

Enregistré
- Posts: 7
- Thanks: 1
Re: Realtek RTL9201R Firmware 1.32.7
20 hours 21 minutes ago
Another Jeyi enclosure with a newer chip. RTL9201-VB-CG with 9.34.11.
Code:
**************************************************************
Device : [Port2] : Realtek RTL9201 #0
**************************************************************
U2PHY : n/a
U3PHY : n/a
VID : 0x0bda
PID : 0x9201
MANUFACTURE : "Realtek"
PRODUCT : "RTL9201"
SERIAL : "012345679085"
SCSI_PRODUCT : "RTL9201 "
SCSI_VENDOR : "Realtek "
USB_SELF_PWR : n/a
DISK_HOTPLUG : 0x03
LED : n/a
PINMUX1 : n/a
PINMUX2 : n/a
U2_MAXPWR : n/a
U3_MAXPWR : n/a
ASPMDIS : n/a
PCIE_REFCLK : n/a
DISK_IPS_THRES : 0x0a
SWR_1_2V : n/a
EN_UPS : n/a
PD : n/a
CUSTOMIZED_LED : 35 01 02 00 00 00 00 00 00 00 00 00 00 00 00
SUSPEND_LED_OFF : n/a
FORCE_USB_SPEED : n/a
FORCE_PCIE_SPEED : n/a
EN_U1U2 : n/a
FORCE_USB_QUIRK : n/a
FORCE_PCIE_QUIRK : n/a
FAN : n/a
DIS_SHOW_EMPTY_DISK : n/a
FORCE_SATA_NORMAL_DMA : n/a
UART_DBG_PIN : n/a
FINGER_PRINT_EN : n/a
RM_INTERNAL_RD : n/a
HS_AUTO_SWITCH : n/a
UART_BAUD_RATE : n/a
CUSTOMIZED_DISK_IDENTIFY : n/a
HW_LED_CFG : n/a
CDROM_CFG : n/a
SUPPORT_HID : n/a
LATE_INIT_DISK : n/a
SCSI_WP_PIN : n/a
SD_MMC_TYPE : n/a
FORCE_PORT_TYPE : n/a
BCDDEVICE : n/a
SUSPEND_DISK_OFF : 0x01
SCSI_WB_PIN : n/a
CUSTOMIZED_FEATURE : n/a
PERIPH_API : n/a
RAID_CFG : n/a
Boot Mode : Flash
FW Ver : 9.34.11
FW Build Date : 2024.10.25
IC Pkg Type : SATA
UUID : n/a
Disconn_ForceUSB2 : false
Please Log in or Create an account to join the conversation.
- Shonk
-
Topic Author
- Offline
- The Best Poster
-

Enregistré
- Posts: 154
- Thanks: 66
Re: Realtek RTL9201R Firmware 1.32.7
20 hours 9 minutes ago
Yeah 9.34.11 is on mydigit.cn but i dont have a chinese id to register for the website being in the uk and all
i was hoping someone would mirror it on mega or something
www.station-drivers.com/index.php/en/for...1-32-7?start=20#5603
www.mydigit.cn/thread-564463-1-1.html
i was hoping someone would mirror it on mega or something
www.station-drivers.com/index.php/en/for...1-32-7?start=20#5603
www.mydigit.cn/thread-564463-1-1.html
Please Log in or Create an account to join the conversation.
- jelb0
-
- Offline
- Poster 2
-

Enregistré
- Posts: 7
- Thanks: 1
Re: Realtek RTL9201R Firmware 1.32.7
17 hours 16 minutes ago
At least it seems my version is the latest.
I know it's not a troubleshooting forum, but my SATA NVME keeps getting disconnected in this enclosure. The whole drive just disappears. I was successfully able to do a full 240GB h2testw run, getting it to 65 degrees, without disconnecting. But whenever I leave it idle for a minute, it's gone...
I know it's not a troubleshooting forum, but my SATA NVME keeps getting disconnected in this enclosure. The whole drive just disappears. I was successfully able to do a full 240GB h2testw run, getting it to 65 degrees, without disconnecting. But whenever I leave it idle for a minute, it's gone...
Please Log in or Create an account to join the conversation.
- Shonk
-
Topic Author
- Offline
- The Best Poster
-

Enregistré
- Posts: 154
- Thanks: 66
Re: Realtek RTL9201R Firmware 1.32.7
16 hours 55 minutes ago
I know the problem your talking about
I have spi dumps of other firmware but not flashable with the realtek tool
only a ch341a
1.32.7 is fine (we have a realtek flashable updater from windows
9.32.74 does that also the drive will just disapear at random when not doing alot (i only have a spi backup from a Cofre Disco Duro)
1.33.88 is fine (i only have a spi backup from a Cofre Disco Duro)
If it was me i would try and get the updater from the forum or take a spi backup
then flash 1.32.7 and see if its fixed you could then roll back to 9.34.11 if required if you had a backup or the updater for 9.34.11
I have spi dumps of other firmware but not flashable with the realtek tool
only a ch341a
1.32.7 is fine (we have a realtek flashable updater from windows
9.32.74 does that also the drive will just disapear at random when not doing alot (i only have a spi backup from a Cofre Disco Duro)
1.33.88 is fine (i only have a spi backup from a Cofre Disco Duro)
If it was me i would try and get the updater from the forum or take a spi backup
then flash 1.32.7 and see if its fixed you could then roll back to 9.34.11 if required if you had a backup or the updater for 9.34.11
Please Log in or Create an account to join the conversation.
- jelb0
-
- Offline
- Poster 2
-

Enregistré
- Posts: 7
- Thanks: 1
Re: Realtek RTL9201R Firmware 1.32.7
16 hours 45 minutes agoDo you suggest me trying to flash 1.32.7 from your opening post ? After making my own custom .cfg using these instructions ? I don't know how an SPI backup works, but it sounds like it's a chip backup made by connecting it in some direct hardware way.[...] 1.32.7 is fine (we have a realtek flashable updater from windows
1.33.88 is fine (i only have a spi backup from a Cofre Disco Duro)
If it was me i would try and get the updater from the forum or take a spi backup
then flash 1.32.7 and see if its fixed [...]
Please Log in or Create an account to join the conversation.
Time to create page: 0.077 seconds

