Marvell 92xx A1 Firmware Image Repository

I am sharing a new 92xx A1 firmware image that was dumped by MNfrstrtD from a SI-PEX40057 (Marvell 9230 A1) PCIe card and kindly shared to me;

PACKAGE VERSION: 2.3.0.1067
AUTOLOAD VERSION: 200020
LOADER VERSION: 21001008
BIOS VERSION: 1.0.0.1028
FIRMWARE VERSION: 2.3.0.1078

I have successfully updated my PEX40054 (Marvell 9230 A1) PCIe card and it functions normally (Legacy/CSM Ctrl+M boot utility, HyperDuo & RAID supported).

The package below has all the 9230 A1 firmware images in my possession:

Marvell_92xx_A1_Firmware.rar

FW_2.3.0.1041
FW_2.3.0.1051
FW_2.3.0.1053
FW_2.3.0.1055
FW_2.3.0.1058
FW_2.3.0.1063
FW_2.3.0.1065
FW_2.3.0.1070
FW_2.3.0.1076
FW_2.3.0.1078

Hello, can you share the Firmware for Revision A0, i use this old chip onboard and cant change it to rev A1.

Hi, unfortunately I don't have 2.3.0.1078 for A0 revision, only the ones you have already tried (i.e. up to 2.3.0.1076).

Yes ive tested 2.3.0.1076 for A0 and it slows down the BIOS in a bad way, you will need 5 minutes ore more to enter the Motherboard bios. Actually im using 2.3.0.1070 and its ok but it only shows two drives in ESXi/FreeNAS (port 1, 3).
I have an PCIe Card with Rev A1 and firmware 2.3.0.1078 that works great. But i will need the PCIe Slot for ethernet and have to use the Onboard controller...

How to determine revision A0 or A1 have a STLAB A-520? This 1078 ImageA1.bin is for BIOS or for UEFI? When 1078 version will be like normal distribute, not as a Image?

The 1078 ImageA1.bin is for BIOS (legacy).