Marvell AQC113C FourPartID Firmware updater edit
- i0ntempest
- 离线
- Newbie
-
Enregistré
- 文章: 2
- Thanks: 0
Replied by i0ntempest on topic Marvell AQC113C FourPartID Firmware updater edit
Posted 4 天 4 小時 前 #2878
I have three AQC113 cards:
The one built into my Z790 ProArt (0x1D6A:0x94C0:0x1043:0x87F5, updated fine to 1.5.38)
A Seekswan (Chinese brand) PCIe card I got from Taobao (0x1D6A:0x14C0:0x1D6A:0x0001, will not update)
An Innodisk M.2 card (0x1D6A:0x14C0:0x1BC0:0x20E1, will not update)
The error message:
```
Getting four part IDs...
Read four part IDs from the device: 0x1D6A (VID), 0x14C0 (DID), 0x1D6A (SVID), 0x0001 (SDID)
Updating the clx file...
./customclx2 0x1D6A 0x14C0 0x1D6A 0x0001 updatedata.xml updated.clx
customclx2: get_xml_data() returns 69
customclx2: readBdp() returns 69
Could not find the updated firmware image: updated.clx.
```
is the same for both cards what will not update. I'm guessing they don't exist in the xml?
The one built into my Z790 ProArt (0x1D6A:0x94C0:0x1043:0x87F5, updated fine to 1.5.38)
A Seekswan (Chinese brand) PCIe card I got from Taobao (0x1D6A:0x14C0:0x1D6A:0x0001, will not update)
An Innodisk M.2 card (0x1D6A:0x14C0:0x1BC0:0x20E1, will not update)
The error message:
```
Getting four part IDs...
Read four part IDs from the device: 0x1D6A (VID), 0x14C0 (DID), 0x1D6A (SVID), 0x0001 (SDID)
Updating the clx file...
./customclx2 0x1D6A 0x14C0 0x1D6A 0x0001 updatedata.xml updated.clx
customclx2: get_xml_data() returns 69
customclx2: readBdp() returns 69
Could not find the updated firmware image: updated.clx.
```
is the same for both cards what will not update. I'm guessing they don't exist in the xml?
Last Edit:4 天 4 小時 前
來自 i0ntempest
Last edit: 4 天 4 小時 前 by i0ntempest.
Please 登錄 或 新增帳號 to join the conversation.
Hi yes you have to add ls in the xml file for recognition, Shonk knows more than me
Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060, Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
來自 admin
Please 登錄 或 新增帳號 to join the conversation.
- i0ntempest
- 离线
- Newbie
-
Enregistré
- 文章: 2
- Thanks: 0
Replied by i0ntempest on topic Marvell AQC113C FourPartID Firmware updater edit
Posted 4 天 3 小時 前 #2880
Thanks. Given the possibility of bricking the card I need to know exactly how to mod the xml files. In what section should I add those IDs (that is what firmware file to use)?
來自 i0ntempest
Please 登錄 或 新增帳號 to join the conversation.
yes I understand I have the same motherboard as you and it is true that it was easier after that it is more difficult with additional cards, Shonk and more experienced
Configuration
Asus Z790 Pro Art, Intel Cpu I7 14700K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX3060, Alimentation Asus ROG 850W, Samsung SSD 990 Pro, SSD980 Pro, Clavier Roccat Vulkan , Souris Asus, Boitier NZXT H6, HP Creative SB Kratos Free Fibre 10Gb Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
來自 admin
Please 登錄 或 新增帳號 to join the conversation.
建立頁面時間:0.763 秒