Marvell/Aquantia AQC113, AQC113C, AQC-113CS (10Gbps) Firmware Version 1.5.45
- Shonk
-
- Uzakta
- The Best Poster
-

Enregistré
- İletiler: 141
- Thanks: 62
Re: Marvell/Aquantia AQC113, AQC113C, AQC-113CS (10Gbps) Firmware Version 1.5.45
11 saat 28 dakika önce
use iperf z390 can only get 6.7gbps of actual throughput on pcie 3.0 x1 after overheads maybe you will get more on a pch that has more bandwidth
but either way you wont get over around 7.6-7.8 gbps even if you get 100% throuput
but either way you wont get over around 7.6-7.8 gbps even if you get 100% throuput
Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.
- BrN
-
- Uzakta
- Poster 2
-

Enregistré
- İletiler: 9
- Thanks: 1
Re: Marvell/Aquantia AQC113, AQC113C, AQC-113CS (10Gbps) Firmware Version 1.5.45
8 saat 13 dakika önce
Je ne comprends pas ce qu'il faut modifier. Mon périphérique correspond bien à cette configuration # 3. VID=0x1D6A, DID=0x04C0, SVID=0x1D6A, SDID=0x0001
Mais il me dit device not match. Une idée ?
Mais il me dit device not match. Une idée ?
Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.
- admin
-
Konu yazarı
- Uzakta
- Admin
-

Administrateur
- Fdrsoft (Admin)
- İletiler: 575
- Thanks: 354
Re: Marvell/Aquantia AQC113, AQC113C, AQC-113CS (10Gbps) Firmware Version 1.5.45
5 saat 16 dakika önce - 5 saat 11 dakika önce
Il faut modifier les deux lignes du fichier flashUpdateScript.ps1
Voici le fichier modifier si besoin
Voici le fichier modifier si besoin
Bu ek dosyasını konuklar görüntüleyemez.
Görüntülemek için hesabınız varsa oturum açın ya da kayıt olun.
Görüntülemek için hesabınız varsa oturum açın ya da kayıt olun.
Asus Z890 ProArt, Intel Cpu Core Ultra 7 265K, Memoires 32Go Corsair DDR5 (6000Mhz CL30), Water-cooling Thermaright, nVidia Geforce RTX4060, Alimentation Gigabyte 850W, Samsung SSD 990 Pro, SSD9100 Pro, Steelserie Pro , Souris Razer, Boitier HUMMER, HP Steelserie, Free Fibre Ultra (8Go/8Go), Lan 10Gb, Cable CAT8/7, Switch 10/5/2.5Gbps, Casque Philips Fedelis.
Son düzenleme: 5 saat 11 dakika önce Düzenleyen:admin
Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.
- BrN
-
- Uzakta
- Poster 2
-

Enregistré
- İletiler: 9
- Thanks: 1
Re: Marvell/Aquantia AQC113, AQC113C, AQC-113CS (10Gbps) Firmware Version 1.5.45
4 saat 54 dakika önce
Merci pour ton retour et le temps passé.
J'ai téléchargé le pack que tu as posté. J'ai le même problème de device does not match. Mais je comprends pas pourquoi sachant que j'ai bien une correspondance avec mon périphérique. Si tu as la solution, je prends avec plaisir !
J'ai téléchargé le pack que tu as posté. J'ai le même problème de device does not match. Mais je comprends pas pourquoi sachant que j'ai bien une correspondance avec mon périphérique. Si tu as la solution, je prends avec plaisir !
Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.
- jumpy76
-
- Çevrim dışı
- poster 4
-

Enregistré
- İletiler: 15
- Thanks: 0
Re: Marvell/Aquantia AQC113, AQC113C, AQC-113CS (10Gbps) Firmware Version 1.5.45
3 saat 57 dakika önce
Please try this file after renaming it to .ps1 (not.jpg).
Replace it in the directory of the updater; it should detect your ID, I'll not be responsible in case of bricking the device.
Replace it in the directory of the updater; it should detect your ID, I'll not be responsible in case of bricking the device.
Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.
Sayfa oluşturma süresi: 0.078 saniye

