NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

Hi JJ I think you are not on a USB 3.2 X1 port (10Gbps) check with the utility it displays as below

 

Hi @spike_V_sky as I mentioned on the first line, issues were solved.
I had to flash the FW twice for it to work. Then I reconnected the enclosure, formatted the disk, and I guess I proceeded with my tests.
Then wrote this post after being really disappointed.
I disassembled the enclosure, removed SSD, put it together again and after connecting it, I managed to get 375 MB/s. Idk if others reach higher speeds than me, but for me this is more than enough.
Thank you for taking your time to answer!

Hi @admin,

yes, it only says SUPER.
According to MSI's specs, my Type C port is: USB3.2 Gen1
If I got it correctly, it should only support 5gbps, right?
Isn't 375 MB/s fast enough?
Please know that my laptop's SSDs might be throttling my newer external SSD.

Thank you for taking your time

Yes  if your port and in 5Gbps it will be 500Mbps you will only have this speed, from 10Gbps you can reach 1gbps, 20Gbps = 2Gbps approx, ...... 

Hi @wade7575, @all

I think I will not get much of a difference by changing FW versions. I got the latest version installed already, and as I mentioned, I got real work copy speed of 375 MB/s over a 12 GB file.
And I also have a USB 3.2 Gen 1 port.
See also Crystal Mark below. 

Thank you very much for your time