Forum Latest

Top Download

Downloads: 496747
Downloads: 454378
Downloads: 242230
Downloads: 233097
Downloads: 180537

Realtek RTL9201R Firmware 1.32.7

Re: Realtek RTL9201R Firmware 1.32.7

2 hafta 3 gün önce
#
My hdd enclosure(RTL9201R) is on firmware 1.32.7 and is working correctly only on windows (usb 3 10Gbps speed) but would not show up on either mac (m2 pro), ios , android or linux, not even the usb is recognised. It uses external power adapter to power 3.5 inch drives. The drive works perfectly on mac os and other unix/linux when i use a usb 2 dongle albeit at usb 2 speeds. I have tried changing config settings but no luck. Does this chip not work with unix/linux or is this another problem on my enclosure

Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.

  • Shonk
  • Shonk kullanıcısının avatarı Konu yazarı
  • Çevrim dışı
  • The Best Poster
  • The Best Poster
    Enregistré
  • İletiler: 166
  • Thanks: 72

Re: Realtek RTL9201R Firmware 1.32.7

3 gün 8 saat önce
#
I had two UTHAI/ShuoLe U25N-L Enclosures arrive today they came with 1.34.29 Firmware 
I have taken an SPI dump and edited it for Drive ID passthrough and such
It has 5 RGB LED's and does a nice rainbow effect

Here's its stock info
Code:
************************************************************** Device : [Port1] :          RTL9201R #0 ************************************************************** U2PHY : n/a U3PHY : n/a VID : 0x0bda PID : 0x9201 MANUFACTURE : " " PRODUCT : "RTL9201R" SERIAL : "012345678985" SCSI_PRODUCT : "RTL9201R        " SCSI_VENDOR : "        " USB_SELF_PWR : n/a DISK_HOTPLUG : n/a LED : 0x03 PINMUX1 : n/a PINMUX2 : n/a U2_MAXPWR : n/a U3_MAXPWR : n/a ASPMDIS : n/a PCIE_REFCLK : n/a DISK_IPS_THRES : n/a SWR_1_2V : n/a EN_UPS : n/a PD : n/a CUSTOMIZED_LED : 41 02 00 00 00 00 00 00 00 00 00 00 00 00 00  SUSPEND_LED_OFF : 0x07 FORCE_USB_SPEED : n/a FORCE_PCIE_SPEED : n/a EN_U1U2 : n/a FORCE_USB_QUIRK : n/a FORCE_PCIE_QUIRK : n/a FAN : n/a DIS_SHOW_EMPTY_DISK : n/a FORCE_SATA_NORMAL_DMA : n/a UART_DBG_PIN : 0x64 FINGER_PRINT_EN : n/a RM_INTERNAL_RD : n/a HS_AUTO_SWITCH : n/a UART_BAUD_RATE : n/a CUSTOMIZED_DISK_IDENTIFY : n/a HW_LED_CFG : n/a CDROM_CFG : n/a SUPPORT_HID : n/a LATE_INIT_DISK : n/a SCSI_WP_PIN : n/a SD_MMC_TYPE : n/a FORCE_PORT_TYPE : n/a BCDDEVICE : n/a SUSPEND_DISK_OFF : n/a SCSI_WB_PIN : n/a CUSTOMIZED_FEATURE : n/a PERIPH_API : n/a RAID_CFG : n/a RW_MODE : n/a FORCE_SATA_QUIRK : n/a Boot Mode : Flash FW Ver : 1.34.29 FW Build Date : 2025.01.13 IC Pkg Type : SATA UUID : n/a Disconn_ForceUSB2 : false
 

Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.

Re: Realtek RTL9201R Firmware 1.32.7

1 gün 17 saat önce
#
Shonk yazdı:
I know the problem your talking about

I have spi dumps of other firmware but not flashable with the realtek tool
only a ch341a

1.32.7 is fine (we have a realtek flashable updater from windows
9.32.74 does that also the drive will just disapear at random when not doing alot (i only have a spi backup from a Cofre Disco Duro)
1.33.88 is fine (i only have a spi backup from a Cofre Disco Duro)

If it was me i would try and get the updater from the forum or take a spi backup
then flash 1.32.7 and see if its fixed you could then roll back to 9.34.11 if required if you had a backup or the updater for 9.34.11
 
Jeyi still hasn't come back to me about the issue. I suspect SUSPEND_DISK_OFF at 0x1 is the culprit. I won't do anything though, because I don't have the 9.34.11 firmware. If only I could download it from  www.mydigit.cn/thread-564463-1-1.html .

Lütfen sohbete katılmak için Giriş yap ya da Hesap açın.

Sayfa oluşturma süresi: 0.076 saniye
Güç veren Kunena forum