NVME USB drives Realtek RTL9210/RTL9220 Firmware Version 1.xx

there is nowhere to ask about it, i search in the manufacturer and nothing.anyway thanks

then all you have left to do is buy a new with RTL9210 chipset. Unfortunately, that's all you can do.

forums.raspberrypi.com/viewtopic.php?t=362991

Hello
I just bought the asus tuf gaming a1, and I heard all that use realtek 9210b chipset should update it firmware, I search online and the tools seem to be from here.
I don't want to broke my tuf a1 so here I ask, how to update fw without breaking it. I read that if there is problem with the update, with dump info then I would know what the original parameter are, but how to revert the update with that dump info I save before perform an update?
If any one here can provide me step about what to do and answer me how to prevent it from brick that would be a lot of help (I read here there a bridge 1 and 8 pin to reset? but I'm not confidence enough to do that)

here is my dump info

**************************************************************
Device : [Port2] : TUF ESD-T1A #0
**************************************************************
U2PHY : n/a
U3PHY : n/a
VID : 0x0b05
PID : 0x1a8a
MANUFACTURE : "ASUSTek"
PRODUCT : "TUF Gaming A1"
SERIAL : "NBD0AP055936"
SCSI_PRODUCT : "ESD-T1A         "
SCSI_VENDOR : "TUF     "
USB_SELF_PWR : n/a
DISK_HOTPLUG : 0x00
LED : 0x01
PINMUX1 : 0x00000000
PINMUX2 : 0x00000000
U2_MAXPWR : 0xfa
U3_MAXPWR : 0x70
ASPMDIS : 0x00
PCIE_REFCLK : n/a
DISK_IPS_THRES : n/a
SWR_1_2V : n/a
EN_UPS : n/a
PD : n/a
CUSTOMIZED_LED : n/a
SUSPEND_LED_OFF : n/a
FORCE_USB_SPEED : n/a
FORCE_PCIE_SPEED : n/a
EN_U1U2 : n/a
FORCE_USB_QUIRK : n/a
FORCE_PCIE_QUIRK : n/a
FAN : n/a
DIS_SHOW_EMPTY_DISK : n/a
FORCE_SATA_NORMAL_DMA : n/a
UART_DBG_PIN : 0x05
FINGER_PRINT_EN : n/a
RM_INTERNAL_RD : n/a
HS_AUTO_SWITCH : n/a
UART_BAUD_RATE : n/a
CUSTOMIZED_DISK_IDENTIFY : n/a
HW_LED_CFG : 0x80000081
CDROM_CFG : n/a
SUPPORT_HID : n/a
LATE_INIT_DISK : n/a
SCSI_WP_PIN : n/a
SD_MMC_TYPE : n/a
FORCE_PORT_TYPE : n/a
BCDDEVICE : n/a
SUSPEND_DISK_OFF : n/a
SCSI_WB_PIN : n/a
CUSTOMIZED_FEATURE : n/a
PERIPH_API : n/a
RAID_CFG : n/a

Boot Mode : Flash
FW Ver : 1.29.391
FW Build Date : 2022.07.28
IC Pkg Type : PCIE/SATA
UUID : n/a

Disconn_ForceUSB2 : false

the reason I want to update my tuf a1 is because the writing speed, reading speed is as what the spec was, but the writing speed is not. 

Thank you for reply,
but when I following this link  www.station-drivers.com/index.php/en/les...t-asus-tuf-gaming-a1 that you said
where do I get the configuration file need to update? I don't see any where I can click to download it on that page, and what the files name would look like?
sorry I'm very new to update firmware and this website.

The dump you made IS the configuration. 
Refer to my earlier reply on this post on how to use it.