Realtek RTL9201 Firmware 1.32.7 / 9.32.74 / 1.33.3 / 1.33.88 / 9.34.11 / 1.34.29

  • Shonk
  • Avatar de Shonk Autor do tópico
  • Desligado
  • The Best Poster
  • The Best Poster
    Enregistré
  • Mensagens: 180
  • Thanks: 85

Re: Realtek RTL9201 Firmware 1.32.7 / 9.32.74 / 1.33.3 / 1.33.88 / 9.34.11 / 1.34.29

4 semanas 14 horas atrás - 4 semanas 13 horas atrás
#
I have been trying on and off to extract firmware from a Realtek SPI dump for about a year. 

I was able to extract v1.32.7 a while ago, but firmware versions newer than v1.32.7 are structured differently and are even flashed differently by MPtool Lite. 
The key was using the v9.34.11 firmware to compare how it was structured.

Anyway, one thing I have noticed since I added a 4Mbit SPI to the UTHAI Q5/Q6/Q7 the config for them uses these parameters:
- LED = 0x3
- CUSTOMIZED_LED = 08 00 
- UART_DBG_PIN = 100
- DISK_HOTPLUG = 0x3
- DISK_IPS_THRES = 0xa
- DIS_SHOW_EMPTY_DISK = 0x1

DISK_HOTPLUG is not supported on newer firmwares and causes disconnection/firmware crash issues after the drive goes to sleep. DISK_IPS_THRES seems fine.
hence why enclosures coming with newer firmware dont have it in the config or have commented it out with updates like is the case with jeyi

Compatibility Results for DISK_HOTPLUG = 0x3
- RTL9201VB_v1.32.7.112522_signed.bin = Fine
- RTL9201VB_v9.32.74_071723_dbg.bin = Untested 
- RTL9201VB_v1.33.3.092723_signed.bin = Untested
- RTL9201VB_v1.33.88.071824_signed.bin = Untested
- RTL9201VB_v9.34.11.102524_dbg.bin = Not Working
- RTL9201VB_v1.34.29.011325_signed.bin = Not Working
 
Ultima edição : 4 semanas 13 horas atrás por Shonk.
Os seguintes utilizadores Agradeceram: Stasiz

Por favor Iniciar sessão ou Criar uma conta para se juntar à conversa.

  • Shonk
  • Avatar de Shonk Autor do tópico
  • Desligado
  • The Best Poster
  • The Best Poster
    Enregistré
  • Mensagens: 180
  • Thanks: 85

Re: Realtek RTL9201 Firmware 1.32.7 / 9.32.74 / 1.33.3 / 1.33.88 / 9.34.11 / 1.34.29

1 semana 5 dias atrás - 1 semana 5 dias atrás
#
I had 3 Ugreen US221 Enclosures arrive today i have 5 already they are all ASMedia ASM235CM 10Gbps Sata Enclosures
anyway the three that arrived today one was ASMedia ASM235CM the other two where RTL9201-VB-CG and are 10Gbps
so the RTL9201R is the downbin locked at 5Gbps I updated them to 1.34.29 fine from 1.33.3 that Ugreen had used

here's the cfg for the Ugreen US221 RTL9201 Variant
Code:
************************************************************** Device : [Port4] : Crucial_ CT512M550SSD1 #0 ************************************************************** U2PHY : n/a U3PHY : n/a VID : 0x0bda PID : 0x9201 MANUFACTURE : "Ugreen" PRODUCT : "Ugreen Storage Device" SERIAL : "1333092759D7" SCSI_PRODUCT : "n/a" SCSI_VENDOR : "n/a" USB_SELF_PWR : n/a DISK_HOTPLUG : 0x03 LED : 0x01 PINMUX1 : n/a PINMUX2 : n/a U2_MAXPWR : n/a U3_MAXPWR : n/a ASPMDIS : n/a PCIE_REFCLK : n/a DISK_IPS_THRES : 0x03 SWR_1_2V : n/a EN_UPS : n/a PD : n/a CUSTOMIZED_LED : 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00  SUSPEND_LED_OFF : n/a FORCE_USB_SPEED : n/a FORCE_PCIE_SPEED : n/a EN_U1U2 : n/a FORCE_USB_QUIRK : n/a FORCE_PCIE_QUIRK : n/a FAN : n/a DIS_SHOW_EMPTY_DISK : 0x01 FORCE_SATA_NORMAL_DMA : n/a UART_DBG_PIN : 0x64 FINGER_PRINT_EN : n/a RM_INTERNAL_RD : n/a HS_AUTO_SWITCH : n/a UART_BAUD_RATE : n/a CUSTOMIZED_DISK_IDENTIFY : n/a HW_LED_CFG : n/a CDROM_CFG : n/a SUPPORT_HID : n/a LATE_INIT_DISK : n/a SCSI_WP_PIN : n/a SD_MMC_TYPE : n/a FORCE_PORT_TYPE : n/a BCDDEVICE : n/a SUSPEND_DISK_OFF : n/a SCSI_WB_PIN : n/a CUSTOMIZED_FEATURE : n/a PERIPH_API : n/a RAID_CFG : n/a RW_MODE : n/a FORCE_SATA_QUIRK : n/a Boot Mode : Flash FW Ver : 1.33.3 FW Build Date : 2023.09.27 IC Pkg Type : SATA UUID : n/a Disconn_ForceUSB2 : false

Here's them updated to 1.34.29

 
Ultima edição : 1 semana 5 dias atrás por Shonk.
Os seguintes utilizadores Agradeceram: Stasiz

Por favor Iniciar sessão ou Criar uma conta para se juntar à conversa.

Tempo para criar a página: 0.076 segundos
Desenvolvido por Kunena