Marvell 92xx A1 Firmware Image Repository - Page 2 - STATION-DRIVERS

Marvell 92xx A1 Firmware Image Repository

Plus d'informations
il y a 1 an 10 mois - il y a 1 an 10 mois #2638 par Deniska
I successfully upgraded with 1078 firmware my STLAB A-520 card by MARVELL 9230 chipset.
But be attention, that this image.A1 with 1078 firmware is a dump from another card , and it has inside it's own MDU parameters and after that you need to restore your mdu parameters from the backup (from your file with MDU parameters ) even if you made go.bat -e -y and go.bat -y command. Because image already contain some MDU parameters from another card.

We can use go.bat -e -y go.bat -y or go.bat -w -y go.bat -y doesn't metter.
After the procedure you have to restore MDU your parameters from your Backup mdu file by MDU_MAG utility.

If we usually restore clean IMAGE.A1 from the original installation setup (not like dump from the unknown card) we can use go.bat -e -y go.bat -y command to save your own MDU configuration and in that case we don't need to restore it.

MDU parameters need to change some settings, for example it usefull for add HYPERDUO HYBRID mode.

Example how to restore mdu parameters with MDU utility:

"mdu_mag restore_cfg -f 9200.txt", where 9200.txt is your text file with your MDU_PARAMETERS, see MDU utility and HowTo.txt for more info.
Dernière édition: il y a 1 an 10 mois par Deniska.
Les utilisateur(s) suivant ont remercié: chinobino

Connexion ou Créer un compte pour participer à la conversation.

Plus d'informations
il y a 1 an 2 jours - il y a 1 an 2 jours #4140 par AndreyPopov

I successfully upgraded with 1078 firmware my STLAB A-520 card by MARVELL 9230 chipset.
But be attention, that this image.A1 with 1078 firmware is a dump from another card


can you provide right MDU parameters (9200.txt file) for STLAB A-520 with 1078 firmware?


and second question for all (on exist 1065 firmware).

I try create RAID0 on two mSATA SSD.
- RAID0 created
- if use 32K Stripe block - not want format
- if use 64K Stripe block - format complete, but if any files copy - hang :(
Dernière édition: il y a 1 an 2 jours par AndreyPopov.

Connexion ou Créer un compte pour participer à la conversation.

Plus d'informations
il y a 3 semaines 15 heures #5542 par chinobino
Here is an update for those still using Marvell 9230 controller.

I have uploaded a new zip archive with both A0 and A1 firmware.

Please not that UEFI versions are now available and that after flashing them the Marvell setup utility will NOT be available on boot and is not a part of the firmware!

You must copy the content of the '9230_tools' folder (included in the archive) to a bootable USB device and boot into a UEFI shell.

Running 'go.nsh' which will load the Marvell UEFI Utility 'uefi64.efi' from the bin folder, which shold present you with this;



Marvell_9230_A0+A1_Firmware+Tools.zip
Les utilisateur(s) suivant ont remercié: Shonk

Connexion ou Créer un compte pour participer à la conversation.

Temps de génération de la page : 0.082 secondes