Marvell 92xx A1 Firmware Image Repository - Page 2 - STATION-DRIVERS

Marvell 92xx A1 Firmware Image Repository

More
1 year 11 months ago - 1 year 11 months ago #2638 by Deniska
I successfully upgraded with 1078 firmware my STLAB A-520 card by MARVELL 9230 chipset.
But be attention, that this image.A1 with 1078 firmware is a dump from another card , and it has inside it's own MDU parameters and after that you need to restore your mdu parameters from the backup (from your file with MDU parameters ) even if you made go.bat -e -y and go.bat -y command. Because image already contain some MDU parameters from another card.

We can use go.bat -e -y go.bat -y or go.bat -w -y go.bat -y doesn't metter.
After the procedure you have to restore MDU your parameters from your Backup mdu file by MDU_MAG utility.

If we usually restore clean IMAGE.A1 from the original installation setup (not like dump from the unknown card) we can use go.bat -e -y go.bat -y command to save your own MDU configuration and in that case we don't need to restore it.

MDU parameters need to change some settings, for example it usefull for add HYPERDUO HYBRID mode.

Example how to restore mdu parameters with MDU utility:

"mdu_mag restore_cfg -f 9200.txt", where 9200.txt is your text file with your MDU_PARAMETERS, see MDU utility and HowTo.txt for more info.
Last edit: 1 year 11 months ago by Deniska.
The following user(s) said Thank You: chinobino

Please Connexion or Create an account to join the conversation.

More
1 year 1 month ago - 1 year 1 month ago #4140 by AndreyPopov

I successfully upgraded with 1078 firmware my STLAB A-520 card by MARVELL 9230 chipset.
But be attention, that this image.A1 with 1078 firmware is a dump from another card


can you provide right MDU parameters (9200.txt file) for STLAB A-520 with 1078 firmware?


and second question for all (on exist 1065 firmware).

I try create RAID0 on two mSATA SSD.
- RAID0 created
- if use 32K Stripe block - not want format
- if use 64K Stripe block - format complete, but if any files copy - hang :(
Last edit: 1 year 1 month ago by AndreyPopov.

Please Connexion or Create an account to join the conversation.

More
2 months 13 hours ago #5542 by chinobino
Here is an update for those still using Marvell 9230 controller.

I have uploaded a new zip archive with both A0 and A1 firmware.

Please not that UEFI versions are now available and that after flashing them the Marvell setup utility will NOT be available on boot and is not a part of the firmware!

You must copy the content of the '9230_tools' folder (included in the archive) to a bootable USB device and boot into a UEFI shell.

Running 'go.nsh' which will load the Marvell UEFI Utility 'uefi64.efi' from the bin folder, which shold present you with this;



Marvell_9230_A0+A1_Firmware+Tools.zip
The following user(s) said Thank You: Shonk

Please Connexion or Create an account to join the conversation.

Time to create page: 0.193 seconds