DFI

MODELS

VERSION

CORRECTION

648FX-ALE pcb B+

2003/11/28

• 1. To further improve the memory compatibility. 2. To solve "No Display" issue happened after changing CMOS setup and rebooting the system. 3. To solve "Can not shut down" issue wen using 4-port LAN card.

648FX-AL pcb B+

2003/11/28

• 1. To further improve the memory compatibility. 2. To solve "No Display" issue happened after changing CMOS setup and rebooting the system. 3. To solve "Can not shut down" issue wen using 4-port LAN card.

661FX-MLV

2003/12/30

• To solve the S3 resuming issue under WIndows 98 and Windows Me.

661FX-MLVE pcb rev A+

2003/12/30

• To solve the S3 resuming issue under WIndows 98 and Windows Me.

662-TMG/G

060728

• Major Reasons of Change:
  1.Modify Graphic Engin Clock item default value from 166MHz to 133MHz.
  2.Fixed USB K/B no function.
  3.Added superior PM function.
  4.Fixed Conroe CPU hang '00', if clear CMOS.
  5.Patch 266 CPU FSB error.
  6.Fixed SIO power on function.
  7.Fixed WINXP64 issue.
  8.Fixed COM port fail.
  9.Fixed CPU ratio error issue.

848P-AL rev. C

050105

• Updated CPU-ID for CPU on D0 and E0 stepping.

855GME-MGF pcb rev A

2004/12/10

• 1. Identified the FSB and CPU clock detection in BIOS and POST Screen.
  2. Removed the CPU/DIMM ratio display on POST screen to keep from confusing users.
  Remarks: 1. Please set jumper of J3 at “2-3 ON” for FSB400 mobile CPU with CPU clock at 100MHz.
  2. To try non-FSB400 mobile CPU, please keep all jumpers at J3 all at "OFF" state or keep no jumper at J3.

865GV-MLV rev. C & D

050105

• Updated CPU-ID of CPU on "D0" and "E0" stepping.

865PE INFINITY pcb A+ & B+

2003/12/19

• 1. To add the support of SSDD and SVID for Cmedia 9739 and 9761. 2. To fix the bug that occasionally hangs up when using P4 2.0G CPU.

865PE INFINITY rev. B

04/04/09

• Fixed the bug that SATA HDD capacity be detected as 136G when installing Maxtor 250G, WD 250G, Seagate 160G.
  2.Fixed the bug of being unable to detect speed of chassis FAN when using chassis fan with speed below 2500 RPM (Vantec Fan).
  3.Fixed the bug that Memtest86 V.1.10 will detect different timing when manually setting CAS Latency of Corsair memory module.
  

865PE INFINITY  pcb A

040409

865PE-AL rev. B

2005/04/19

• Fixed SATA Port1 detection failure with combined mode

865PE-TAG Rev A

20050922

• Modify Shotdown Temperature item default value from 60 degree C to Disabled.
  2. Fixed OSB Logo show incorrectly.
  3. Added CPU micro-code for CPUID:0F49h and 0F4Ah(E0 Stepping).

748-AL pcb A+

2003/12/12

845GV-MLV pcb rev C+

2003/09/18

865GV-MLV pcb rev B+

2003/11/10

• To be added boot-on-LAN function. 2. For 4Mb flash ROM on revision B+ or newer 

875 INFINITY

2003/11/21

• 1. To expand "CMOS Reloaded" feature to allow saving 4 sets of setting. 2. To add the hot-key function for "CMOS Reloaded". 3. To add micro code of P4EE and Prescott CPUs. 4. To add the optional selection of "Disable" at "System Bandwidth" feature to allow users changing the settings of memory module.

875P INFINITY pcb A+

2004/03/02

• To update micro code for Prescott CPU supporting 2.8G FSB533 and 3.0G FSB800.Remarks: Please watch out the cooler and ventilation in chassis. We also suggest adding heatsink on MOSFET Components.

875 INFINITY rev. B

2004/07/21

• Diamond Flash Image file for BIOS dated 2004/07/21 to bundle Intel ICH5R SATA RAID BIOS in version 3.5.6.6253.
  

915P-TAG

2005/03/31

• 1. Added C1E BIOS control.
  2. Support EM64T CPU.
  3. Enhance the support of SATA/SATAII HDDs.

915G-TMGF

2005/03/30

• 1. Added C1E BIOS control.
  2. Support EM64T CPU.
  3. Enhance the support of SATA/SATAII HDDs.

945G-TMGF

060303

• 1. Support Intel Pentium 4 9xx Series 65nm Dual-core CPU.
  2. Fixed IDE Secondary Master show wrong string from ATA to PIO when clear CMOS.
  3. Modify CPU Temperature show by add 10 degree C for meet actual CPU temperature.
  4. Fixed can't detect PS2 mouse when PS2 Key-Board absent.
  5. Fixed Shutdown Temperature item no function.
  6. Fixed OSB Logo show incorrectly.
  7. Fixed DDR2-667MHz unstable.
  8. Removed BIOS Flash Protect item.
  9. Fixed show IDE 80PIN detect error if IDE second channel is SATA device.

AD70-SC

0412

AD70-SR

beta 0412

AD72-SN(PCB Version A&D)

Beta BIOS

AD73 Pro pcb revision a

beta 0412

AK74-EC/SC(PCB Version A/B/C)

BIOS Beta

AK75-EC(PCB Version A/B/C/D/E)

BIOS Beta

AK76-SN(PCB Version A&B)

Beta BIOS

AM33-EC pcb A+

2003/11/04

• To also support Duron Applebred FSB133 CPU with 0.13-Micro technology.

AZ30-EL (pcb serie)

2003/10/16

• To also support AMD Duron Applebred CPU

CA64-TC(PCB Version A/B)

BIOS Beta

CM33-TC pcb revision a & b

0420

CM33-TL  Pcb C

041221

• Support 48-bit HDD with capacity higher than 137GB.

CM64-AL

060728

• Major Reasons of Change:
  Change power loss resume default to "off".

CS62-TC(PCB Version B)

BIOS Beta

CW35-D/L/S(PCB Version C2)

BIOS Beta

CW35-SB(PCB Version C2)

BIOS Beta

070820

• 1.Fixed set setup CPU FSB value to 266 MHz when resume from S3 the CPU FSB will reduced to 177 MHz.
  2.Fixed FSB 200 CPU set to high than 200 after load default will can't boot.
  3.Fixed some FSB 266 CPU can't boot problem.

(INFINITY) INF. P965-S

070904

• 1. Change logo.
  2. Update CPU micro code.

(INFINITY) INF. P35-T2L

070823

• 1. Support DDR2 533 Module when NB strap jump set to 333MHz.
  2. Fixed can't install vista when plus 4GB memory.
  3. Fixed Vista64 DRAM size issue.
  4. Fixed EIST can't be disabled in vista.
  5. Fixed can't boot from SATA CD-ROM when Enable RAID mode.

(INFINITY) INF. P35-T2RL

070913

• 1.Enhance data transmitting added turbo.
  2.Fixed cdrom name error in setup.
  3.Added CMD Tfine control Tfine Item.
  4.Added Tras 1~8.
  5.Added T2 Dispatch item.
  6.Change Read delay phase adjust item config.

KM400-MLV pcb A+

2004/02/20

• To solve the installation bug under Windows 98SE when using Seagate HDD with firware in version older than 3.75. Remarks: Hardware Modification is required for revision "AC0" or older.

K8M800-MLV

2004/04/04

K8M800-MLVF pcb A

2004/08/12

• To fix the bug of auto boot-up from suspend mode on some boards occationally.

K8M800 INFINITY pcb A

2004/10/29

• To also improve the S3 resuming feature.

K8M800 INFINITY pcb B

2004/10/13

• 1. To switch the south bridge from VT8237 to VT8237M.
  2. To also improve the S3 resuming feature.
  Remarks:This is the first released version for motherboards in revision BXX.

K8T800Pro-ALF pcb C & B

2005/06/09

• Support AMD Sempron 64 754pin, E6 Stepping CPUs.

KT600-AL pcb A

2004/07/16

• To solve the bug that some certain USB devices occasionally can not be detected at USB ports 7 and 8.  

KT600-AL  pcb B

040716

• Added micro code for AMD Sempron CPU.

LANPARTY 865PE pcb A+ & B+

2003/12/19

• 1. To add the support of SSDD and SVID for Cmedia 9739 and 9761. 2. To fix the bug that occasionally hangs up when using P4 2.0G CPU.

LANPARTY NFII ULTRA pcb A+

2004/01/07

• To revise the BLP table. 2. To solve the bug that the system could not enter S1 mode.

LANPARTY NFII ULTRA B pcb A+

2004/05/05

• To solve the S3 resuming bug.

LANPARTY UT nF3 ULTRA-D

2005/07/05

• Major Reasons of Change: HT Default 4X.

LANPARTY UT nF3 250Gb

2005/05/04

• Update Memtest v1.55.
  2. Fix certain USB device cause system hang up.
  3. Fix C&Q failure with certain memory modules.
  4. Support New E0 Stepping Athlon64/Sempron.
  5. Add Disable item within "Shutdown Temperature" option

LANPARTY nF4 SLI-DR Rev A

2005/06/23

• 1. Patch Dual-Core CPU performance problem.
  2. Add Errata 123 option.
  3. Add ACPI SRAT option.

060406

• 1 . Remove Write CAS latency item and replace it by Odd Divisor Select.
  2 . Add support for SST 49LF040B LPC flash ROM.
  3 . Add CPU temperature calibration option.
  4 . Fix s1/s3 temp error after resume.
  5 . Fix startup vid option fail.
  6 . Fix c'n'q .5 multiplier not working with opteron cpu.
  7 . Fix day of month alarm can not set as 0 for every day usage.
  8 . Fix ATI X1000 series logo error.
  

LANPARTY UT nF4-D

050615

• Support AMD Athlon 64 FX60 CPUs.

LANPARTY UT nF4 SLI-D Rev A

05/11/14

LANPARTY UT nF4 SLI-DR Rev A

05/06/15

LANPARTY UT nF4 Ultra-D

05/06/15

LANPARTY UT 865PE-T Rev A

20050922

• .Modify Shotdown Temperature item default value from 60 degree C to Disabled.
  2. Fixed OSB Logo show incorrectly.
  3. Added CPU micro-code for CPUID:0F49h and 0F4Ah(E0 Stepping).

LANPARTY UT NF590 SLI-M2R/G

060829

• Major Reasons of Change:
  Fix the system hang up when setting the IDE or SATA Device in “Standard CMOS Features”.

LANPARTY UT NF680i LT SLI-T2R

080320

1. Update CPU micro code for support Intel 45nm E8xxx series CPUs.
2.Added support CPU N/2 ratio.
3.Update ROMSIP.
4.Fixed Intel D430 CPU C1E Fail.
5.Update NVMM 4.081.34

LANPARTY UT P35-T2R

080317

• Added warning message for over voltage.

LANPARTY UT 790FX-M2R

080505

1. Fixed DRAM timing show error.
2. Change detect SPD Function for TRFC.
3. Fixed Sempron CPU Can't into CMOS setup.
4. Fixed BIOS DRAM Voltage detecting error.

LANPARTY UT 915P-T12 pcb A

050411

• Added C1E BIOS control./ . Support EM64T CPU

LANPARTY UT NF4 SLI-DR Venus

060406

• 1 . Remove Write CAS latency item and replace it by Odd Divisor Select.
  2 . Add support for SST 49LF040B LPC flash ROM.
  3 . Add CPU temperature calibration option.
  4 . Fix s1/s3 temp error after resume.
  5 . Fix startup vid option fail.
  6 . Fix c'n'q .5 multiplier not working with opteron cpu.
  7 . Fix day of month alarm can not set as 0 for every day usage.
  8 . Fix ATI X1000 series logo error.
  

LANPARTY UT CFX3200-DR

060425

• Enhance Memory module compatibility.

LANPARTY UT ICFX3200-T2R/G

070730

• Fixed CPU Bselect can’t set to Auto mode with Intel FSB 1333MHz CPU.

LANPARTY UT RDX200 CF-DR

20051223

• 1. Fix memory Set 2-1-1-1-1 and 4-1-1 mode wrong.
  2. Set Cool'n'Quiet default disable.
  3. Change the description of DQDRV.
  4. Fix Read Preamble Table Error.
  5. Shorten the delay time during clock programming loop.
  6. Add over clocks step by step.
  7. Fix fill 3114 SVID&SSID under Cross fire mode.
  8. Fix soft-reset hang on POST code F2h if enable USB mouse support.
  9. Change CMOS used to fix some control item can’t save.
  10. Add support K8 FX60 CPU.
  11. Update SiI3112 Raid ROM.
  12. Fix some SATA(DiamondMax 10 (6B160M0) HDD ) HDD detect fail at first time cool boot.

LANPARTY PRO875B Pcb A+

2003/11/21

• 1. To expand "CMOS Reloaded" feature to allow saving 4 sets of setting. 2. To add the hot-key function for "CMOS Reloaded". 3. To add micro code of P4EE and Prescott CPUs. 4. To add the optional selection of "Disable" at "System Bandwidth" feature to allow users changing the settings of memory module.

LANPARTY PRO875B rev. B

2004/03/08

• To calibrate the temperature display when using some certain 2.4G FSB800 CPU sold in market.

LANPARTY 875P-T Pcb A

2004/09/01

• Fix the LAN issues upon doing overclocking.

LANPARTY UT 915P-T12

2005/04/11

• . Added C1E BIOS control.  2. Support EM64T CPU.

LANPARTY 925X-T2

2005/04/07

• 1. Added C1E BIOS control. 2. Support EM64T CPU.

M1689-AL

2005/08/12

• Added support E6 step CPU.
  Fixed hang-up at POST 26h with some value DIMM.

NB35-TC (pcb A+)

2003/10/29

NB71-SC pcb rev A

9.12 beta

NB70-SC pcb rev A/B/C

912 beta

NB78-BL/B

2004/03/17

• First Relerase for products with PCB in version A2. The revision code is "AB*".
  Please check the revision code at the lower right corner of label affixed on printer port.

NFII 400-AL pcb A+

2004/12/03

• To enhance the compatibility with Kingston PC400 512 DDR. 2. To Solve the issue of S1 resuming.

NFII ULTRA INFINITY pcb A

2004/11/19

• To enahnce the support of AMD 55-Watt Low Power CPU

NF3 ULTRA-DAGF

060530

• Support OPTERON 939 cool 'n' quiet.

nF4-DAGF

060301

• 1. Support AMD Athlon64 FX60 Dual core CPUs.
  2. Date of month alarm can’t set to “0”.
  3. Some USB device may cause to system hang up in post 50H.

NS36-TL/B pcb B

2004/08/31

• . To enhance the system stability.2. To fix the bug of occassional installation failure.3. To fix the bug of unexpected auto-reboot

NT72-SA

2004/03/02

• To solve the bug of hanging up at cheking memory upon using FSB133 CPU.

P4M266A-MLV

2004/02/25

• 1. To prevent the system from shutting down upon detecting error message.
  2. To change the default setting of APIC as "Enable" upon executing "Load Fail-Safe Defaults" to prevent from booting failure under Windows XP environment.

P4X533-ALE pcb a+

2004/03/17

• To enhance the support to some certain lots of Prescott 2.4G FSB533 CPU.

PB64-BX/PB64-ZX(PCB Version A)

BIOS Beta

PE21-EC/EL pcb rev A

912 beta

PS35-BL pcb rev A+

2003/09/30

• To solve the detection issue of Seagate 40GB HDD with firmware in version 3.06 connected as primary slave when there's no IDE device connected to primary master.

PS83-BL pcb rev A+

2003/10/06

• Fixed the detect issue of Seagate 40GB HDD with firmware 3.06 as being connected as primary salve device while there's no IDE device connected to primary master.

PS83-BL pcb Rev B

2005/03/18

• Fixed "PWR Lost Resume State" item no function.

PS83-BL rev. BA

2004/02/13

• 1. PCB Version be Modified to "B". 2. To Support Prescott CPU.
  3. To Upgrade the BIOS ROM from 2Mb to 4Mb

PS85-BL pcb rev A+

2003/10/01

• To solve the detection issue of Seagate 40GB HDD with firmware in version 3.06 connected as primary slave when there's no IDE device connected to primary master.

PT800-ALE pcb A+

2003/12/31

PT880-ALF

2004/04/01

WT70-EC(PCB Version A)