Intel Rapid Storage Technology Version 14.8.0.1042 WHQL

Après la version Intel Rapid Storage Technology Version 14.7.0.1000 WHQL, voici aujourd'hui la Version 14.8.0.1042 WHQL pour la prise en charge et la gestion du mode RAID/AHCI pour les disques SSD et classiques sous Windows.

Voici les améliorations apportées (Release note anglais)

Resolved Issues in 14.8.0.1042  Production Version

 

 

Reference  No   

Description

Affected  OS's

4938355

ODD tray periodically ejects when ZPODD is  enabled.

Windows 10-64

4938654

Loading IRST driver shows BSOD on Win7 installation.

Win7-64

 

4938771

CSMI_SAS_PHY_INFO  cannot be obtained on some chipsets.

Win7-64,Windows  10 - 64

 

4938884

OS crash when SCSI  VERIFY command with LBA on RAID and SRT configurations

Windows 10-64

 

4938858

Intermittent BSOD  DRIVER_IRQL_NOT_LESS_OR_EQUAL

Windows 10-64

 

4938546

Disk  name is not correct in the Device manager.

Win7-64

 

4938802

DRIVER_IRQL_NOT_LESS_OR_EQUAL  when reboot test on win10 RAID0/1

Windows 10-64

 

4938828

Cannot Install Win7 OS  with M.2 G2 PCIe SSD and 4G memory

Win7-64

 

4938732

There is a BSOD under  S3/S4 stress test overnight.

Windows 10-64

 

4938702

WHQL System - Sleep  and PNP (disable and enable) with IO Before and After  

Win7-64

 

4938448

Updating  timeout value for SATA command initialize, set to 50ms

Windows 10-64

 

4938730

No  bootable Device found failure occurs during warm boot cycling in RAID mode

Windows 10-64

 

4938615

7E  caused during cold boot stress test

Windows 10-64

 

4938936

Accelerated drive's serial number  is changed after create SRT and restart

Win7-64,Windows 10-64,Windows 8 -  64

 

4937847

Selecting option "Enable  volume write-back cache" blocks creation Recovery volume.

Windows 8 - 64

 

 

4938497

No performance improvement for M2 PCIe SSD after re-mapping

Windows 10-64

 

 

4938585

IOCTL return incorrect port number  after SRT volume delete

Windows 10-64

 

 

4938765

NVMe responsiveness too slow on SKL RVP10

Windows 10-64

 

 

4938806

Intermittent BSOD during reboot  stress test with 3 PCIe remapping NVMe 3DR0 configuration

Windows 10-64

 

 

4938815

BSOD after S3 on remapped system

Windows 10-64,Windows 8 - 64

 

4938742

Incorrect data received from IOCTL  when using remapped disk AHCI and NVMe at the same  time

Windows 10-64

 

 

4938634

Invalid maximum cache size in UI  (up to 64 GB)

Windows 8 - 64

 

4938569

SCSI Compliance Test fails with  SRT Configuration

Windows 10-64,Windows 8 - 64

 

4938585

IOCTL return incorrect port number  after SRT volume delete

Windows 10-64

 

4938259

BSOD during OS start with  incomplete RAID volume

Windows 10-64,Windows 8 - 64

 

4937872

Two drives marked as "System  drive" in RST UI

Windows 8 - 64

 

4938408

Unable to create cache on remapped  device on port 7

Windows 10-64,Windows 8 - 64

 

4938416

[SRT] File copy is slow when cache  is 100% full

Windows 10,Windows 10-64,Windows  8,Windows 8 - 64

 

4938454

Two drives marked as "System  drive" in RST UI

Windows 8 - 64

 

4938408

Unable to create cache on remapped  device on port 7

Windows 10-64,Windows 8 - 64

 

4938398

No image is shown after returning  from S4 state

Windows 8 - 64

 

4938364

RAID 5 Crash dump is not created  on RST driver

Windows 10-64

 

4938302

RCfgSata  does not allow to re-use 'Available' Cache to accelerate disk

Pre-OS

 

4938940

RCfgSata  does not allow create cache volume with SSD /pcie  AHCI disk after creating RAID0 or RAID1

Pre-OS

 

4938839

RCfgSata returns  incorrect disk's ID when Mark disk as spare

Pre-OS

 

4938219

SRT mode changes to Enhanced, after setting Maximized mode and  reboot PC

Détail du package:

  • Date du package: 19/11/15
  • Date & Version: 11/04/2015,14.8.0.1042
  • WHQL: oui
  • Officiel: non
  • Sous:
  • Microsoft Windows 7*
  • Microsoft Windows 7 x64 Edition*
  • Microsoft Windows 8*#
  • Microsoft Windows 8 x64 Edition*
  • Microsoft Windows Server 2008 R2 x64*#
  • Microsoft Windows Server 2012 x64 Edition*#
  • Microsoft Windows Server 2012 R2 x64 Edition*
  • Microsoft Windows 8.1*#
  • Microsoft Windows 8.1 x64 Edition*
  • Microsoft Windows 10*#
  • Microsoft Windows 10 x64 Edition*
  • Pour: (Z170, H170, B150, H110, Z97, H97, ...)
  • PCI\VEN_8086&DEV_8C02&CC_0106.DeviceDesc = "Intel(R) 8 Series/C220 Chipset Family SATA AHCI Controller"
    PCI\VEN_8086&DEV_8C03&CC_0106.DeviceDesc = "Intel(R) 8 Series Chipset Family SATA AHCI Controller"
    PCI\VEN_8086&DEV_8C82&CC_0106.DeviceDesc = "Intel(R) 9 Series Chipset Family SATA AHCI Controller"
    PCI\VEN_8086&DEV_8C83&CC_0106.DeviceDesc = "Intel(R) 9 Series Chipset Family SATA AHCI Controller"
    PCI\VEN_8086&DEV_9C02&CC_0106.DeviceDesc = "Intel(R) 8 Series/C220 Chipset Family SATA AHCI Controller"
    PCI\VEN_8086&DEV_9C03&CC_0106.DeviceDesc = "Intel(R) 8 Series Chipset Family SATA AHCI Controller"
    PCI\VEN_8086&DEV_9C82&CC_0106.DeviceDesc = "Intel(R) 9 Series Chipset Family SATA AHCI Controller"
    PCI\VEN_8086&DEV_9C83&CC_0106.DeviceDesc = "Intel(R) 9 Series Chipset Family SATA AHCI Controller"
    PCI\VEN_8086&DEV_9D03&CC_0106.DeviceDesc = "Intel(R) 6th Generation Core Processor Family Platform I/O SATA AHCI Controller"
    PCI\VEN_8086&DEV_A102&CC_0106.DeviceDesc = "Intel(R) 100 Series/C230 Chipset Family SATA AHCI Controller"
    PCI\VEN_8086&DEV_A103&CC_0106.DeviceDesc = "Intel(R) 100 Series/C230 Chipset Family SATA AHCI Controller"
    PCI\VEN_8086&DEV_8D02&CC_0106.DeviceDesc = "Intel(R) 9 Series Chipset Family SATA AHCI Controller"
  • PCI\VEN_8086&DEV_2822&CC_0104.DeviceDesc = "Intel Chipset SATA RAID Controller"
    PCI\VEN_8086&DEV_282A&CC_0104.DeviceDesc = "Intel Chipset SATA RAID Controller"
  • Release note: oui

 N'hésitez pas a laisser un commentaire sur le Forum, Merci

Intel Rapid Storage Technology Version 14.8.0.1042 WHQL

Aucun commentaire