Main Repository Page Drivers Marvell LAN AQC-107, 108, 100, 113 & AQN-107, 108, 100 Firmwares

Marvell/Aquantia Firmware Version 3.1.118 (AQx-100/107/108/111)
Download

Thank you for downloading Marvell/Aquantia Firmware Version 3.1.118 (AQx-100/107/108/111)

If your download does not start automatically after a few seconds, please click on the Download link above

Description:

Marvell/Aquantia Firmwares sous Windows:

Marvell/Aquantia AQC-100 Version 3.1.118 (ROM=3.0.192, PCI 3.1.1)

Marvell/Aquantia AQC-107 Version 3.1.118 (ROM=3.0.192, PCI 3.1.1)

Marvell/Aquantia AQC-107S Version 3.1.118 (ROM=3.0.192, PCI 3.1.1)

Marvell/Aquantia AQC-108 Version 3.1.118 (ROM=3.0.192, PCI 3.1.1)

Marvell/Aquantia AQC-111 Version 3.1.118 (ROM=3.0.192, PCI 3.1.1)

Officiel: non

Pour: AQC100, AQC108, AQC107, AQN100, AQN108, and AQN107

Motherboards with 10GbE/5GbE
 ASRock Fatal1ty X299 Professional Gaming i9 XE
 ASRock Fatal1ty X399 Professional Gaming
 ASRock Fatal1ty X370 Professional Gaming
 ASRock Fatal1ty Z370 Professional Gaming i7
 ASRock X470 Taichi Ultimate
 ASRock Z390 Taichi Ultimate
 ASRock Fatal1ty Z270 Professional Gaming i7
 ASRock Z270 SuperCarrier

NIC, TB3 dongles, and TB3 docking stations
 Aquantia AQtion 10G Pro NIC
 Aquantia AQtion 10G Gaming NIC
 Aquantia AQtion 5G Pro NIC
 Aquantia AQtion SFP+ NIC
 Gigabyte GC-AQC107
 Promise SANLink3 N1
 QNAP QXG-10G1T
 QNA-T310G1S
 QNA-T310G1T
 Sonnet Solo10G SFP+ Thunderbolt 3
 Sonnet Technologies Solo 10G Thunderbolt 3

FW release ver 3.1.118
===========================================================================
FW release bundle for Marvell NICs (AQC100, AQC107, AQC108, AQC111C, AQC112C)

Content:
MAC: 3.0.192
PCIROM: 3.1.1-antigua
PHY: Cal-04.04-Candidate2
PHY: Eur-03.07-Candidate12
PHY: Eur-Eng-FastAdcCal-9.1.2
PHY: v9.7.2
TOOLS: 0.7.0.0


3.1.118
15 July 2020
-------------
Bug fix
Fixed issue with waking up by link up

3.1.116
30 June 2020
-------------
Bug fix
Fixed RPC configuration at Link UP event could be overwritten by PHY FW

3.1.115
11 June 2020
-------------
New features:
Added LED provisioning

3.1.111
7 April 2020
-------------
Bug fix:
Fixed issue with WOL on AMD machines
FW should apply MSM settings without link flipping
Fixed traffic loss if MACSEC overflow occurred

3.1.109
21 February 2020
-------------
Bug fix:
Fixed TX Datapath stuck caused by flow control
Enhancement:
[AQC-100]
Improved 1G optic link up time
Changes:
LEDs interface now uses register 0x31C instead of 0x37C

3.1.106
17 December 2019
-------------
Bug fixes:
[AQC-100]
* Removed EEPTOM protection while SFP module is starting as temporary solution
Changes:
[AQC-107]
* Disabled 1G EEE mode
Enhancement:
* Reworked PCI configs for AQC 100, AQC107, AQC111 for better compatibility with some motherboards

3.1.102
4 December 2019
-------------
Changes:
* Included IEEE test mode for 100M for AQC111
* Added scheduled DMA for AQC107

3.1.100
16 September 2019
-------------
Features:
* Optional capability to negotiate at the same link rate during wake up as it was before PC suspend
* Added runtime D3 state support
Enhancement:
* SNR data provide information for all 4 pairs along with the cable diagnostic data
Bug fixes:
* Fixed false message about FW heartbeat stuck via domes

3.1.96
16 August 2019
-------------
Bug fixes:
  [AQC111]
  * Fixed rare Tx stuck at 100M and 1G link speed caused by pause frames
  [AQC100]
  * Fixed issue with AQS-107 module when FW hasn't restarted fast enough during link down-link up
  * Fixed issue of reading garbage from SFP module during start up sequence
  
3.1.93
30 July 2019
-------------
Bug fix:
* Fixed issue with 100M link after some interactions with WOL on AQC111
  [AQC100]
* Added MAC heartbeat

3.1.90
3 July 2019
-------------
Bug fix:
* Fixed issue with PTP which doesn't enable WSP mode when required
Enhancement:
* Tweaked SERDES settings for Copper SFP+ modules

3.1.89
1 July 2019
-------------
  [AQC100]
* Added dedicated SERDES settings for DACs to MAC provisioning
* Tweaked SERDES settings for Fiber SFP+ module

3.1.88
21 June 2019
-------------
Bug fixes:
* Fixed omitted refresh of Global System Configuration for 100M and 1G after link up
* Fixed BSOD for ASUS ROG CROSSHAIR VIII FORMULA motherboards
  [AQC100]
* Fixed failed link up after link down/up
* Fixed BDP for Sonnet Thunderbolt dongles
Known issues:
* NIC may missing in device manager after waking up on ASUS ROG CROSSHAIR VIII FORMULA motherboards

3.1.86
11 June 2019
-------------
Bug fixes:
* Fixed double ping replies on first ICMP request
  [Bermuda]
* Card wasn't negotiated as PCIe3 on some ASUS motherboards

3.1.84
31 May 2019
-------------
Bug fixes:
* Changed default set for stripping of padding
* Fixed issue with duplication echo replies on first echo request in ping proxy
* Increased IFG value with MACSEC enabled to avoid MACSEC overflow.
* Fixed zeroed SFP data identifier field AQS SFP+ module
* Fixed link up on 100M
* Fixed size of MAC FW revision in provisioning
  [Bermuda]
* Card wasn't negotiated as PCIe3 on some ASUS motherboards

3.1.81
13 May 2019
-------------
Bug fixes:
* Fixed timer freeze at Windows Boot Manager with enabled PXE boot
* Improved link-up time for first boot sequence, which may prevent PXE Boot

Submitted By:

Fdrsoft (admin)

Submitted On:

15 Apr 2021

File Size:

3.47Mo

Downloads:

302

File Version:

3.1.118

File Author:

Fdrsoft

Log in to cast your vote