Qui dit nouveaux chipsets dit nouveau pack des drivers USB 3.0 de Renesas.
Ce nouveau pack Version 3.0.8.0 WHQL prend en charge seulement les nouveaux controllers uPD720201 & uPD720202.
Dorénavant deux packs sera disponibles:
1e) pack pour uPD720200/uPD720200A Version 2.1.27 WHQL.
2e) pack pour uPD720201/uPD720202 Version 3.0.8.0 WHQL
Plus d'information sur les controllers uPD720201/uPD720202
http://www2.renesas.com/usb/en/product/upd720202.html
Voici quelques informations du packages:
Date du drivers: 15/09/2011
WHQL: oui du 27/09/2011
Officiel: non
Release note: oui
Sous: Windows Xp/Vista/7 32 ou 64bits
Release note (3.0.2.0 beta > 3.0.8.0):
1. A specific USB Full Speed device that can't respond to a standard request
isn't detectd.
2. There is a possibility that a multi-display isn't displayed after
S3->Resume when the USB-to-VGA device connected to the USB 3.0 Host
is used in multi-display mode. This issue occurs depending on USB-to-VGA
device driver version.
3. There is a possibility that the Bluetooth communication is cut off with
a specific Bluetooth module.
4. There is a USB speaker which only requests a data transfer by a URB within
about 1ms. In this case, sound is cut off depending on CPU performance.
5. iPad isn't detected on iTunes application after S3->Resume.
6. BSOD ("Blue Screen of Death," i.e., system halt) occurs when PC shoutdown
is performed while a specific Bluetooth module (Billionton BT-0003) is
connected and a specific Bluetooth module driver version is being used.
This issue doesn't occur with the latest Bluetooth module driver version.
- The following additional issues were fixed.
-- Driver
1. There is a possibility that BSOD occurs or USB 3.0 Hub isn't detected on
Windows XP when hot plug operation is done with a USB 3.0 Hub having USB
devices already connected to it.
2. USB 3.0 Host controller Driver forcibly caused BSOD from ver2.1.16.0 to ver
2.1.25.0 when Host System Error of USB 3.0 occurred.
When we updated to ver2.1, we had a mistake in which the USB 3.0 Host
Controller Driver focibly caused BSOD.
3. A USB device isn't detected when the USB device is connected to a downstream
port on a specifc USB 3.0 Hub that moves to U2 state althouth U1/U2 timeout
vaule is zero.
4. There is a miscalucuation of U2 Exit Latency.
--Monitor
1. The pop-up message is wrong when a USB 3.0 device is connected to USB 2.0 port
while running the Simplified Chinese OS.
2. The pop-up message is wrong when USB 3.0 Host Controller does not have
enough bandwidth available while running the Polish OS.
---------------------------------------------------------------------------
Version 3.0.7.0Beta : September 8th, 2011
---------------------------------------------------------------------------
- Second Beta version Release for uPD720201/uPD720202 ES2.0 or later.
---------------------------------------------------------------------------
---------------------------------------------------------------------------
Version 3.0.2.0Beta : May 19th, 2011
---------------------------------------------------------------------------
- First Beta Version Release for uPD720201/uPD720202
---------------------------------------------------------------------------
Téléchargement (Download) Renesas USB 3 drivers 3.0.8.0 WHQL
http://www.station-drivers.com/page/renesas.htm
