Firmware: Marvell 88SE91xx Version 2.2.0.1125b

[fdrsoft]

Nouveau pack deja sorti en debut d'année pour le Controllers Sata 6G Marvell 88SE91xx Serie Version 2.2.0.1125 avec quelques modifications.

- suppression du répertoire CpuIDE (PATA)
- contenu du firmware différent
- kit complet (BIOS, FW, Boot Loader etc)
(Source Simon)

Un petit rappell, le chipset Marvell 88SE91xx intégrent une grande majorité de cartes mères de Type Intel X58, Z68, X79, Z77 pour gerer 2 Sata 6G supplementaires.
Aucune information sur les améliorations apportées.

Disponible aussi: firmware Version 2.2.0.1125
viewtopic.php?f=32&t=3567
Disponible aussi: firmware Version 2.1.0.1504
viewtopic.php?f=32&t=2876

Merci a Simon pour l'info

Fdrsoft & Station-Drivers ne pourra être tenu responsable pour tous dommages resultant d'un mauvais flashage du firmware !

Téléchargement (Download)
http://www.station-drivers.com/page/marvell.htm

[axy]

Flashed ok to my GA-790XTA-UD4. Sequental read with Plextor M3-128 is up to 410 Mb/s (510 Mb/s passport)

[fdrsoft]

[fdrsoft]

Nouveau pack de drivers Version 1.2.0.1027 WHQL
viewtopic.php?f=32&t=3913

[Mikey2]

Hello! I registered to this site to ask this question...can you please help? (I hope I am posting this in the correct spot, I am sorry if I am not. )

I have a Marvell 88SE9123 SATA 6Gb/s Controller. It is happily running my SSD at 6Gb/S on driver version 1.2.0.1006. (I downloaded it from this site last year.)

How much of an improvement is this driver? Is it worth the update? Finally, although Google is translating this site pretty well to English, I am having trouble finding a list of changes for each version. Does such a list (or "change-log" exist?

Thank you very much for your help!
MikeY

[dariuszd1]

Hi,

I have a question. I have a motherboard Asus P9X79 DELUXE. On it is an integrated chipset Marvell 91xx SATA 6G Controller.

Hardware ID:
PCI \ VEN_1B4B & DEV_9130 & SUBSYS_84381043 & REV_11
PCI \ VEN_1B4B & DEV_9130 & SUBSYS_84381043
PCI \ VEN_1B4B & DEV_9130 & CC_010601
PCI \ VEN_1B4B & DEV_9130 & CC_0106

BIOS Version: 1.0.0.1031
Firmware Version: 2.2.0.1124
Boot Loader Version: 1.0.1.0002
Driver Version: 1.2.0.1027
Chip Revision ID: B1
Device ID: 9130

Please let me know if I can update the firmware to the version available on the website of 06/06/12 "MV-91xx Version 2.2.0.1125b" or the earlier of the date 05/01/12 "MV-91xx Version 2.2.0.1125"?

Unfortunately, I did not find the information anywhere and for the integrated on my motherboard this operation is feasible.

What command should run the bios flash procedure? I know that first I need to start the computer in DOS.
The second question is whether to turn off the update time and the SSD Caching or leave ACHI mode which I'm currently using?


thank you
Darek.