|
AOPEN |
|
|
||||
|
|
||||
|
Modele |
bios & flash bios |
Correctif |
Manuel |
|
|
final |
beta |
|||
|
DX34 Plus-U |
|
|
||
|
|
|
|||
|
DX37 Plus-U |
|
|
||
|
DX3R 1U |
|
|
||
|
DX3R Plus |
|
|
||
|
DXPL-U Series |
|
|
||
|
DXPS-U Series |
|
|
||
|
EPC945GT-m8 |
1.Update Intel new VBIOS ROM(CAL_1358.DAT). Fix screen display reduce that test by 3Dmark2003. Add EDID 848x480 and 856x480 resolution. 2.Fix USB20 controller work fail when resume from S4 mode. 3.Support Intel OSB 3.5 spec. 4.Support Intel Celeron M CPU. 5.Fix APM suspend function fail. |
|||
|
i975Xa-YDG |
|
|||
|
i915Gm-PL |
|
Added EIST Support. |
||
|
i946GZm-DF |
||||
|
i945Pa-PLF |
|
|||
|
i945Ga-PHS |
||||
|
i945Ga-PLF |
||||
|
i945GMt-FA |
Modify Thermal profile |
|||
|
i945GTt-VFA |
|
|||
|
i945GTm-VHL |
|
|||
|
i915Ga-HFS |
- enabled the options to select TV format in BIOS. i.e. NTSC/PAL/SECAM |
|
||
|
i915Ga-E |
|
Added EIST support.Fixed S3 resume fail when plug Plextor PX712SA SATA DVD Rewriter in slave port. |
|
|
|
i915Pa-E |
Added EIST support.Fixed S3 resume fail when plug Plextor PX712SA SATA DVD rewriter in slave port. | |||
|
i915Pa-EFRII |
|
Patched Apacer moduele 512MB use by 16 chip and 2 bank cant work. |
||
|
i915Ga-EFRII |
|
Patched Apacer moduele 512MB use by 16 chip and 2 bank cant work. |
||
|
i915Gm-I |
Updated CPU micro code as following.
Modified CPU Warning Temp range from 65 to 95 degree.
Added USB Storage support. |
|||
|
i915Ga-HFS |
Fixed CPU ratio setting error.
Updated EIST function. |
|||
|
i915GMm-HFS |
|
Fixed BIOS appearance "IDE Channnel 1 no 80 Conductor cable installed" message
when connect with SATA HDD |
||
|
i865Gm-IL |
|
1. Add new CPU micro code. 2. Fix the PXE boot error. |
||
|
i865Gm-I |
|
Updated Intel CPU Micro Code.
Fixed Northwood HT CPU can¡¦t En/Disable in BIOS setup (item disappear).
Fixed 'no 80 conductor cable installed' is always showed when 40pin cable
and ATA33 CDROM are plugged.
Fixed DMI can't correctly report AGP slot usage information.
Modified shutdown temperature to 70, 80, 90(deg.c) and Disable. |
||
|
i855GMEm-LFS |
|
AGP / PCI Bus Frequency show only. | ||
|
i865PEa-7IF |
|
Added EIST support.
Fixed hang on post 96h with intel 6XX CPU.
Removed some items to add USB Storage support.
Fixed PXE can¡¦t work when plug a USB device.
Modified CPU Warning Temp range from 65 to 95 degree.
Updated CPU micro code as following. |
||
|
i865Gm-7L |
1. Add new CPU micro code. |
|||
|
i865Gm-7N |
1. Add new CPU micro code. |
|||
|
MK33 |
|
|
|
|
|
MK33M |
|
|
|
|
|
MK73LE |
|
|
|
|
|
MK73-LEN |
|
|
|
|
|
MK73LE-V |
|
|
|
|
|
MK77 |
|
|
|
|
|
MK77M-8XL |
|
|
|
|
|
MK77M-8XN |
Add support Duron 133(1.4G-1.8G) cpu |
|
||
|
MK77M II |
Modified The memory size of Memory testing in post screen is incorrect after clear COMS. Modified After executing new Ezwinflash, No "CMOS checksum error-Default Loading" strings in post screen. |
|
||
|
MK77M-1394 |
|
|
||
|
MK77MV |
|
|
||
|
MK77-533 |
|
|
||
|
MK7A |
|
|
||
|
MK79G-1394 |
Supports Duron 133 L2 64K CPU / beta 1. Fix Sempron Model name does not show in Windows XP. |
|
||
|
MK79G-N |
Fixed AGP card can't work in bootblock mode. (beta) 1. Fix no show Sempron Model name in Windows XP. |
|
||
|
MK89-L |
Fixed S3 resume failed with Athlon64 CG ver |
|
||
|
MXXX |
|
|
|
|
|
MX3S |
(Enhance memory performance.) |
|
||
|
MX3S-T |
Fixed the problem "Unable to enter Windows when USB card reader is connected" |
|
||
|
MX3S-U |
|
|
||
|
MX3W-E 2 |
|
|
||
|
MX3W-E 3 |
|
|
||
|
MX3WPRO |
|
|
||
|
MX33 |
|
|
||
|
MX34 |
|
|
||
|
MX34 pro |
|
|
||
|
MX34U |
|
|
||
|
MX36 |
|
|
||
|
MX36CE |
Checksum: 0E97h Updated VGA BIOS from C1622_06.rom to C1622_15.rom Fixed After upgrade to BIOS 1.04, there will be no display in Windows ME |
|||
|
MX36LE |
|
|
||
|
MX36LEN |
|
|
||
|
MX36LE-UI |
|
|
||
|
MX36LE-U |
|
|
||
|
MX36LEUN |
|
|
||
|
MX36LE-V |
|
|
||
|
MX4B |
|
|
||
|
MX4BS |
(Northwoord 1.6G, 1.8G, 2.0GMHz show "A"..) |
|
||
|
MX4BP-533 |
|
|
||
|
MX4BR-533 |
|
|
||
|
MX4G/MX4L |
|
|
||
|
MX4GL |
|
|
||
|
MX4GR |
|
|
||
|
MX4GER |
|
|
||
|
MX4GEVE |
|
|
||
|
MX4GVR |
Checksum: 2536h Fixed boot from LAN issue. |
|||
|
MX4GVR-GN |
Supported Celeron D processor. |
|||
|
MX4LR |
|
|
||
|
MX4LR-GN |
|
|
||
|
MX4LS |
|
|
||
|
MX4PER |
CheckSum: 338Fh Initial Release |
|||
|
MX4SG-N |
Updated VGA BIOS 3241.supported Celeron-D processor. |
|
||
|
MX4SG-L |
|
|
||
|
MX4SGI-L |
Fixed SYS Temp. |
|
||
|
MX4SGI-N |
Fixed SYS Temp. |
|
||
|
MX4SGI-L-N |
|
|
||
|
MX4SGI-4DL2 |
Supported Celeron D Processor. |
|
||
|
MX4SGI-4DN2 |
Supported Celeron D Processor. |
|
||
|
MX4SGI-4DN-4DL |
|
|
||
|
MX4SGNL |
|
|
||
|
MX4SG-4DL |
Fixed PXE Lan Boot can't work |
|
||
|
MX4SG-4DN |
|
Supported Celeron D processor. |
|
|
|
MX4SGVI-4DN2; MX4SGVI-4DN2(P) |
|
|
|
|
|
MX4SPB-N |
|
|
||
|
MX46 |
|
|
||
|
MX46L |
|
|
||
|
MX46LSV |
|
|
||
|
MX4SG-4DN |
|
|
||
|
MX46 U2 |
|
|
||
|
MX46 U2-GN |
Checksum: 4EDEh Supports CPU Ratio up to 32. Fixed can't install Windows 98SE when the installed partition large than 10GB. Fixed can't build DMI structure. |
|||
|
MX46 U2-VN |
|
|
||
|
MX46-533 |
|
|
||
|
MX46-533-GN |
|
|
||
|
MX46-533 Max |
Fixed issue when plug Cisco Aironet 350 Series Wireless Lan Card cause Onboard VGA only can show 16 colors under WindowsXP |
|||
|
MX46-533-MV |
|
|
||
|
MX46-533-V |
Fixed issue when plug Cisco Aironet 350 Series Wireless Lan Card cause Onboard VGA only can show 16 colors under WindowsXP |
|
||
|
MX46-800N |
|
Fixed some dram will get error frequence value from SPD. Improved Memory compatibility. |
|
|
|
MX6BC Pro II |
|
|
||
|
MX64 |
|
|
||
|
nCK804a-LFS |
|
Support FX60 (FX dual core) CPU. |
||
|
nCK804Ua-LFS |
|
Support FX60 (FX dual core) CPU. |
||
|
n250a-FR |
|
|||
| S651M |
|
|||
|
s661FXm |
|
|||
|
s661FXm-7 |
|
CPU micro code update to support Celeron D sSpec #SL7TU |
||
|
s661FXm-S |
Fixed silent BIOS sense CPU TEMP error |
|||
|
s661FXm-7S |
Add new CPU micro code. (beta Updated VGA Bios to support 1440*900 wide LCD Monitor) |
|||
|
s661FXm-FSN |
Fixed run S3/S4 resume failed with SATA HDD in SATA Port 1 |
|||
|
s661FXm-7US |
- The version of this BIOS is beta. Use it only if you have the following
Seagate/Western Digital hard drive disks. - To fix incompatibilty with Seagate ST3120/ST3160, Western Digital WD1200/WD1600. |
|||
|
s661GXm-7US |
|
- The version of this BIOS is beta. Use it only if
you have the following Seagate hard drive disks. |
||
|
s661GXm-U |
|
- The version of this BIOS is beta. Use it only if you have the following
Seagate hard drive disks. |
||
|
s661FXm-US |
Fixed compatbility issue with Apacer DDR400 Memory Module (beta) Fixed some Large Hard Drive can not be detected issue |
|||
|
s760GXm-US |
Add to support Sempron Rev. E CPU. |
|||
|
s760GXm |
|
Supported Sempron 2600+(Ver.E6) CPU. |
||
|
s760GXm-S |
Supported Sempron 2600+(Ver.E6) CPU. (beta) Updated VGA Bios for supported Wide Screen. |
|||
|
vK8T800a-LF |
|
Add to support AMD Turion 64 CPU. |
||
|
vKM266Pm |
|
Supported AMD K7 Athlon SFF CPU ID = 6A0h , L2 521K 2600+, 2800+ and CPU ID =
6A0H, L2 256K 2500+,2600+,2800+,3000+. |
||
|
vKM400Am-S |
|
Change "VGA Share Memory Size" item default value from 16M to 32M.
Chage "Press F1 to reboot " to " Press F1 to continue". |
||
Toutes les marques et logos apparaissant appartiennent à leurs propriétaires
respectifs.
© 2000-2002 Station Drivers tous droits reservés [Fdrsoft-2002]
|
Outils |
|
Ezclock version 2.00.04 |
|
|
Aoconfig version 2.00.06 |
|
|
Ezskin version 2.00.03 |
|
|
WinBios version 1.04.40 |
|
|
Silentcd version 1.00.05 |
|
|
Silentek Monitoring pc 3.12.20 |
|
|
Silentek II Monitoring pc 4.01.00 |
|
|
Silentek pour AX4SG-Ux serie |
|
|
SilentTek Utility 3.24.09 |
|
|
Ezrestore (pro magic) version 6.0 |
|
|
AK77-8X/AK77-8X Max/AK77-8XN/AK79D Max/AK79D-1394/AK79G Max/AK79G Tube/AK79G-1394/AK79G-V/AK79G |
|